Кухонные комбайны Bosch MCM3100WGB - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
14
Robert Bosch Hausgeräte GmbH
en
Before replacing accessories or additional parts, which move during
operation, switch off the appliance and disconnect from the power
supply. Always disconnect the appliance from the supply if it is left
unattended and before assembling, disassembling or cleaning.
Do not place the power cord over sharp edges or hot surfaces.
To prevent injury, a damaged power cord must be replaced by the
manufacturer or his customer service or a similarly qualified person.
Only our customer service may repair the appliance.
,
Safety instructions for this appliance
Risk of injury
Risk of electric shock
If the power is interrupted, the appliance remains switched on and
restarts when the power is restored.
Never immerse the base unit in liquids or place under running water
and do not clean in the dishwasher.
Before rectifying a fault, pull out the mains plug.
Risk of injury from the rotating tools!
While the appliance is operating, never place fingers in the mixing
bowl. Always use the pusher for adding ingredients.
After switching off, the drive continues running for a short time.
Change tools only when the drive is at a standstill.
Risk of injury from sharp blades/rotating drive!
Never reach into the attached blender jug!
Do not remove/attach the blender jug until the drive has stopped.
Do not remove/attach the universal cutter jug until the drive has
stopped.
Risk of injury from sharp blades!
Do not touch blades of the universal blade with bare hands. When not
in use, always store the universal blade in the blade guard. Clean them
with a brush.
Do not grip the sharp blades or edges of the cutting discs.
Grip the discs by the plastic part in the centre only!
Do not place fingers in the feed tube. Only use the pusher when adding
more ingredients.
Do not touch blades of the blade insert with bare hands.
Clean them with a brush.
Risk of scalding!
If processing hot liquids, steam escapes through the funnel in the lid.
Add a max. 0,4 litres of hot or frothing liquid.
Risk of injury!
Never assemble accessories on the base unit.
MCM3_alle.book Seite 14 Donnerstag, 12. Februar 2015 4:40 16
Robert Bosch Hausgeräte GmbH
15
en
,
Explanation of the symbols on the appliance or accessory
Caution! Rotating tools.
Do not place fingers in the feed tube.
Lock blade insert in the blender or universal cutter jug.
Remove blade insert from the blender or universal cutter jug.
Blade insert with blender/cutting blade
Blade insert with grinding blade
Overview
The instructions describe different features of
the appliance. Figure
shows an overview of
the model.
Please fold out the illustrated pages.
Fig.
Base unit
1 Rotary switch
0/off = Stop
M = Instantaneous switching at maximum
speed, hold switch for required blending
duration.
Settings 1–2, Operating speed:
1 = low speed – slow,
2 = high speed – fast.
2 Drive
3 Cord store
4 Bowl
5 Tool holder
6 Tools *
a Universal blade with blade guard
b Kneading hook
c Chopping disc
7 Cutting discs *
a Slicing reversible disc – thick/thin
b Shredding reversible disc – coarse/fine
c Reversible slicing/shredding disc
8 Lid
a
Filler opening
b
Pusher
Accessories *
9 Blade insert with blender/cutting blade
and seal
10 Blade insert with grinding blade and seal
11 Universal cutter jug
12 Blender jug
13 Lid for blender
a Filler opening
b Funnel-shaped stopper
* for some models:
With the universal cutter use the appliance at
full power (according to the recipe). You can
find the recipe on the illustrated pages
(Fig.
).
If the universal cutter is not included with
the hand blender, it can be ordered from
customer service (order no. 12005833).
Operation
Before operating the appliance and
accessories for the first time, clean
thoroughly; see “Cleaning and servicing”.
Preparation
Place the base unit on a smooth, clean
surface.
Pull cable out of the base unit to the
required length.
Important information
– Use only the rotary switch to switch the
appliance on or off.
– Never switch the appliance off by rotating
the bowl, the blender or a tool.
– Do not switch the appliance on unless
tools or accessories have been
completely attached.
MCM3_alle.book Seite 15 Donnerstag, 12. Februar 2015 4:40 16
15
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
