Ardesto ACM-12P-R290 - Инструкция по эксплуатации - Страница 135

135

EN



 Page 20 



Safety Precautions

Maintenance

· Always unplug the unit before cleaning or servicing.

· DO NOT use flammable liquids or chemicals to clean the unit.

· DO NOT wash the unit under running water. Doing so causes electrical danger.

· DO NOT operate the machine if the power supply was damaged during cleaning. A damaged

power cord must be replaced with a new cord from the manufacturer.

 Maintenance

· During heating pump mode, remove the lower drain

plug from the back of the unit, install the drain

connector(5/8"universal female mender) with 3/4"

hose(locally purchased). For the models without

drain connector, just attach the drain hose to the

hole. Place the open end of the Hose adaptor directly

over the drain area in your basement floor.

Press the power 

cord buckle into 

the rear cover.

√

delivery lift <1.8m

drain hose

adaptor

drain hose

adaptor

NOTE: Make sure the hose is secure so there are no 

leaks. Direct the hose toward the drain, making sure 

that there are no kinks that will stop the warter flowing.

Place the end of the hose into he drain and make sure 

the end of the hose is down to let the water flow 

smoothly.(See Figs with      . Do never let it up.(See Figs 

with     ).When the continuous drain hose is not used, 

ensure that the corresponding drain plug and knob are 

installed firmly to prevent leakage.

√

X

X

plug and let the water drain away. Reinstall the

bottom drain plug and restart the machine until the

"P1" symbol disappears. If the error repeats, call for

service.

· When the water level of the bottom tray reaches a

predetermined level, the unit beeps 8 times, the

digital display area shows "P1" . At this time the air

conditioning/dehumidification process will

immediately stop. However, the fan motor will

continue to operate(this is normal). Carefully move

the unit to a drain location, remove the bottom drain

NOTE: Be sure to reinstall 

            the bottom drain plug 

            firmly to prevent leakage 

            before using the unit.

Remove the 

upper drain 

plug

√

Continuous 

drain hose

√

drain hose

adaptor

Continuous 

drain hose

Remove the 

lower drain plug

•  When the water level of the bottom tray reaches a predetermined 

level, the unit beeps 8 times, the digital display area shows «P1».

At this time the air conditioning/dehumidification process will 

immediately stop. However, the fan motor will continue to 

operate(this is normal). Carefully move the unit to a drain location, 

remove the bottom drain plug and let the water drain away. 

Reinstall the bottom drain plug and restart the machine until the 

«P1» symbol disappears. If the error repeats, call for service.

NOTE: Be sure to reinstall

the bottom drain plug firmly to 

prevent leakage before using 

the unit.