Ardesto ACM-12P-R290 - Инструкция по эксплуатации - Страница 116

116

EN

15. Labelling 

Equipment shall be labelled stating that it has been de-

commissioned and emptied of refrigerant. The label shall 

be dated and signed. Ensure that there are labels on the 

equipment stating the equipment contains flammable 

refrigerant.

16. Recovery 

When removing refrigerant from a system, either for 

servicing or decommissioning, it is recommended 

good practice that all refrigerants are removed safely. 

When transferring refrigerant into cylinders, ensure 

that only appropriate refrigerant recovery cylinders are 

employed. Ensure that the correct number of cylinders 

for holding the total system charge is available. All 

cylinders to be used are designated for the recovered 

refrigerant and labelled for that refrigerant (i.e. special 

cylinders for the recovery of refrigerant). Cylinders shall 

be complete with pressure relief valve and associated 

shut-off valves in good working order. Empty recovery 

cylinders are evacuated and, if possible, cooled before 

recovery occurs. The recovery equipment shall be in 

good working order with a set of instructions concerning 

the equipment that is at hand and shall be suitable for 

the recovery of flammable refrigerants. In addition, a 

set of calibrated weighing scales shall be available and 

in good working order. Hoses shall be complete with 

leak-free disconnect couplings and in good condition. 

Before using the recovery machine, check that it is in 

satisfactory working order, has been properly maintained 

and that any associated electrical components are 

sealed to prevent ignition in the event of a refrigerant 

release. Consult manufacturer if in doubt. The recovered 

refrigerant shall be returned to the refrigerant supplier 

in the correct recovery cylinder, and the relevant