Ardesto ACM-12P-R290 - Инструкция по эксплуатации - Страница 132

132

EN

NOTE: Under AUTO mode, both the AUTO mode and the actual 

operation mode indicator lights illuminate for some models.

FAN operation

•  Press the  «MODE» button until the»FAN « indicator light comes on.

•  Press the «FAN SPEED» button to choose the fan speed. The 

temperature can not be adjusted.

•  Do not put the duct to window.

TIMER operation

When the unit is on, press the Timer button will initiate the Auto-off 

stop program, the TIMER OFF indicator light illuminates. Press the UP or 

down button to select the desired time. Press the TIMER button again 

within 5 seconds, the Auto-on start program is initiated. And the TIMER 

ON indicator light illuminates. Press the up or down button to select the 

desired Auto-on start time.

•  When the unit is off, press the Timer button to initiate the Auto-on 

start program, press it again within five seconds will initiate the Auto-

off stop program.

•  Press or hold the UP or DOWN button to change the Auto time by 0.5 

hour increments, up to 10 hours, then at 1 hour increments up to 24 

hours. The control will count down the time remaining until start.

•  The system will automatically revert back to display the previous 

temperature setting if there is no operation in a 5 seconds period.

•  Turning the unit ON or OFF at any time or adjusting the timer setting 

to 0.0 will cancel the Auto Start/Stop timer program.

•  When the malfunctionoccurs, the Auto Start/Stop timed program will 

also be cancelled.

SLEEP/ECO operation

Press this button, the selected temperature will increase(cooling) or 

decrease(heating) by 1°C/2°F(or 1°F) 30 minutes.The temperature will 

then increase (cooling) or decrease (heating) by another 1°C/2°F(or 

1°F) after an additional 30 minutes. This new temperature will be 

maintained for 7 hours before it returns to the originally selected 

temperature. This ends the Sleep/Eco mode and the unit will continue 

to operate as originally programmed.

NOTE: This feature is unavailabe under FAN or DRY mode.