Ardesto ACM-12P-R290 - Инструкция по эксплуатации - Страница 133

133

EN

OTHER FEATURES

FOLLOW ME/TEMP SENSING feature (On some models)

This feature can be activated from the remote control ONLY. To 

activate SLEEP feature, the set temperature will increase(cooling) 

or de minutes interval, the unit will exit the Follow Me/Temp Sensing 

mode. To activate the Follow Me/Temp Sensing feature, point the remote 

control towards the unit and press the Follow Me/Temp Sensing button. 

The remote control will send this signal to the air conditioner until press 

the Follow Me/Temp Sensing button again. If the unit does not receive 

the Follow Me/Temp Sensing signal during any 7 minutes interval, the 

unit will exit the Follow Me/Temp Sensing mode.

NOTE: This feature is unavailabe under FAN or DRY mode. 

AUTO-RESTART

If the unit breaks off unexpectedly due to the power cut, it will restart 

with the previous function setting automatically when the power 

resumes.

WAIT 3 MINUTES BEFORE RESUMING OPERATION 

After the unit has stopped, it can not be restarted operation in the first 

3 minutes. This is to protect the unit. Operation will automatically start 

after 3 minutes.  

AIR FLOW DIRECTION ADJUSTMENT 

The louver can be adjusted automatically. Adjust the air flow direction 

automatically: (NOTE:On some models the louver can be adjusted 

manually only)

•  When the Power is ON, the louver opens fully.

•  Press the SWING button on the panel or remote controller to 

initiate the Auto swing feature. The louver willl swing up and down 

automatically.

•  Please do not adjust the louver manually.

POWER MANAGEMENT feature (On some models) 

POWER MANAGEMENT feature (On some models) Under cooling 

operation, when the ambient temperature is lower than the setting 

temperature for a period of time, the unit will be automatically operate