Bosch 0.601.624.020 - Инструкция по эксплуатации - Страница 22

Фрезеры Bosch 0.601.624.020 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 272
Загружаем инструкцию
background image

22

 | English 

1 609 92A 0B3 | (30.4.14)

Bosch Power Tools

– Shut the clamping lever for the plunge unit/non-plunge 

base 

22

.

– Adjust the required depth-of-cut; see Section “Adjusting 

the Depth-of-cut”.

Separating the Routing Motor from the Plunge Unit/Non-
plunge Base (see figure C)

– Open the clamping lever for the plunge base/non-plunge 

base 

22

.

– Pull the routing motor to the stop and and hold it in this po-

sition.

– Press securing latch 

21

 and pull the routing motor com-

pletely out of the plunge base/non-plunge base. When us-
ing the non-plunge base 

3

, additionally press clamping le-

ver 

25

.

Inserting a Router Bit (see figure D)

It is recommended to wear protective gloves when in-
serting or replacing router bits.

Depending on the application, router bits are available in the 
most different designs and qualities.

Router bits made of high speed steel (HSS)

 are suitable for 

the machining of soft materials, e. g. softwood and plastic.

Carbide tipped router bits (HM)

 are particularly suitable for 

hard and abrasive materials, e. g. hardwood and aluminium.
Original router bits from the extensive Bosch accessories pro-
gram are available at your specialist shop.
Use router bits with a shank diameter of 12 mm as far as this 
is possible. Only use clean router bits that are in perfect con-
dition.
The router bit can be changed when the routing motor is 
mounted in the plunge base/non-plunge base. However, it is 
recommended to change the tool with the routing motor dis-
mounted.
– Remove the routing motor from the plunge base/non-

plunge base.

– Press and hold the spindle lock button 

27

 (

). If required, 

turn the spindle by hand until the lock engages.

Actuate the spindle lock button 27 only when at a 
standstill.

– Loosen the tightening nut 

17

 with the open-end spanner 

28

 (size 24 mm) by turning in antclockwise direction (

).

– Insert the router bit into the collet. The shank of the router 

bit must be immersed at least 20 mm into the collet.

– Tighten the tightening nut 

17

 with the open-end spanner 

28

 (size 24 mm) by turning in clockwise direction. Release 

the spindle lock button 

27

.

Do not insert a router bit with a diameter larger than 
50 mm when the guide bushing is not mounted. 

Such 

router bits do not fit through the base plate.

Do not tighten the tightening nut of the collet without a 
router bit inserted. 

Otherwise the collet can be damaged.

Dust/Chip Extraction

Dusts from materials such as lead-containing coatings, 
some wood types, minerals and metal can be harmful to 
one’s health. Touching or breathing-in the dusts can cause 
allergic reactions and/or lead to respiratory infections of 
the user or bystanders.

Certain dusts, such as oak or beech dust, are considered 
as carcinogenic, especially in connection with wood-treat-
ment additives (chromate, wood preservative). Materials 
containing asbestos may only be worked by specialists.
– As far as possible, use a dust extraction system suitable 

for the material.

– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the mate-
rials to be worked.

Prevent dust accumulation at the workplace. 

Dusts can 

easily ignite.

Mounting the Extraction Adapter to the Plunge Base 
(see figure E)

The extraction adapter 

30

 can be mounted with the hose con-

nection facing toward the front or rear. When the guide-bush-
ing adapter 

50

 is inserted, it may be required to mount the 

guide-bushing adapter turned by 180 °, so that the extraction 
adapter 

30

 does not touch the release lever 

52

. Fasten the 

extraction adapter 

30

 with the 2 knurled screws 

29

 to the 

base plate 

13

.

To ensure optimum extraction, the extraction adapter 

30

 

must be cleaned regularly.

Mounting the Extraction Adapter to the Non-plunge Base 
(see figure F)

The extraction adapter 

32

 can be mounted with the hose con-

nection facing toward the front or rear. When the guide-bush-
ing adapter 

50

 is inserted, fasten the extraction adapter 

32

 

with the 2 knurled screws 

29

 to the base plate 

13

. For appli-

cations without the guide-bushing adapter 

50

, firstly mount 

the intermediate ring 

33

 to the extraction adapter 

32

, as 

shown in the figure.

Connecting the Dust Extraction

Insert an extraction hose (Ø 35 mm) 

31

 (accessory) into the 

mounted extraction adapter. Connect the extraction hose 

31

 

to a vacuum cleaner (accessory).

The machine can be plugged directly into the receptacle of a 
Bosch all-purpose vacuum cleaner with remote starting con-
trol. The vacuum cleaner starts automatically when the ma-
chine is switched on.

The vacuum cleaner must be suitable for the material being 
worked.

When vacuuming dry dust that is especially detrimental to 
health or carcinogenic, use a special vacuum cleaner.

Operation

Starting Operation

Observe correct mains voltage! The voltage of the pow-
er source must agree with the voltage specified on the 
nameplate of the machine. Power tools marked with 
230 V can also be operated with 220 V.

Preselecting the Speed

The required speed can be preselected with the thumbwheel 

15

 (also while running).

OBJ_BUCH-1178-004.book  Page 22  Wednesday, April 30, 2014  10:24 AM

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Bosch 0.601.624.020?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"