Bosch AKE 35-19 S - Инструкция по эксплуатации - Страница 27

 English | 

27

Bosch Power Tools

F 016 L81 142 | (7.12.16)

Sharpening the Saw Chain

Have your chain sharpened professionally at your authorised 
Bosch after-sales service or sharpen it yourself with a sharp-
ening kit suitable for the chain recommended for your chain-
saw. Observe the sharpening instructions provided with the 
sharpening kit.

Checking the Automatic Oiler

Proper functioning of the automatic saw chain oiler can be 
checked by running the chain saw and pointing the tip of the 
chain bar towards a piece of cardboard or paper on the 
ground. Do not touch the ground with the chain and ensure a 
safety clearance of 20 cm. If an increasing oil pattern devel-
opes, the automatic oiler is operating fine. If there is no oil 
pattern despite a full oil reservoir, see section “Troubleshoot-
ing” or contact your authorized Bosch after-sales service.

After Use/Storage

Clean the moulded plastic housing of the chain saw using a 
soft brush and clean cloth. Do not use water, solvents or pol-
ishes. Remove all debris, especially from the motor cooling 
vents.

After 1 – 3 hours of use, remove the cover 

16

, the chain bar 

12

 and the saw chain 

11

, and clean them using a brush.

Clean the area under the cover 

16

, the drive sprocket 

18

 and 

the chain bar assembly from adherant debris using a brush. 
Clean the oil outlet 

19

 with a clean cloth.

If the chain tensioning mechanism in the cover 

16

 becomes 

difficult to operate, remove the protective lid 

29

, turn the 

locking knob 

15

 and the chain-tensioning ring 

14

 against 

each other, so that debris is loosened from the mechanism 
and can be discarded. Carefully strike or tap out debris from 
the cover 

16

. If the mechanism is heavily clogged, use a soft 

brush or compressed air for cleaning. Do not use tools of any 
kind. (see figure J)

If the chain saw is to be stored for a longer period of time, 
clean the saw chain 

11

 and the chain bar 

12

.

Store the chain saw in a secure, dry place, out of the reach of 
children.

Do not place other objects on the chain saw.

Please take care to place down the chain saw with the oil filler 
cap 

4

 facing upward.

When storing in the sales packaging, the oil reservoir must be 
completely emptied.

Accessories

Cleaning

Saw chain oil, 1 litre   . . . . . . . . . . . . . . . . . . .  2 607 000 181

Saw chain

AKE 35-19 S   . . . . . . . . . . . . . . . . . . . . . . . . .  F 016 800 257

AKE 40-19 S   . . . . . . . . . . . . . . . . . . . . . . . . .  F 016 800 258

After-sales Service and Application 
Service

www.bosch-garden.com

In all correspondence and spare parts orders, please always 
include the 10-digit article number given on the type plate of 
the chain saw.

Great Britain

Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange 
the collection of a product in need of servicing or repair. 
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com

Ireland

Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au

Republic of South Africa
Customer service

Hotline: (011) 6519600

Gauteng – BSC Service Centre

35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za

OBJ_BUCH-1238-002.book  Page 27  Wednesday, December 7, 2016  2:54 PM