Yamaha RX-V2065 - Инструкция по эксплуатации - Страница 59

57

 En

Operating various settings for this unit (Setup menu)

English

INTR

ODUCTION

AD
DITIONAL 

INFORMA

T

ION

APPENDIX

PRE

PARA

T

ION

BA
S

IC

OPERA

T

ION

AD
VANCED

OPERA

T

ION

Reverb Level

Reverb Level parameter adjusts the reverberation sound 
level. Increasing the value of Reverb Level makes the 
reverbration sound level higher, which allows you to 
create more echo.

■

Parameter for MOVIE sound field programs

Decode Type

Selects the decoder type for use with the MOVIE sound 
field programs.

Note

•

You cannot select a decoder for the following MOVIE sound field 
programs.

–

Mono Movie

–

Sports

–

Action Game

–

Roleplaying Game

■

Parameter for 2ch Stereo

Direct

Automatically bypasses the DSP circuit and tone control 
circuit when an analog sound source is selected as the 
input source. You can enjoy a higher quality sound.

■

Parameters for 7ch Stereo

Center Level / Surround L Level / Surround R 
Level / Surround Back Level / Presence L Level / 
Presence R Level

Adjusts the volume of the center, surround L/R, surround 
back and presence L/R channels in the 7ch Stereo 
program. The available parameters differ depending on the 
setting of the speakers.

■

Parameter for Straight Enhancer and 7ch 
Enhancer

Effect Level

Adjusts the Compressed Music Enhancer effect level. 
When the high-frequency signals of the source is 
emphasized too much, set the effect level to “Low”. To 
reduce the effect, set this parameter to “Low”.

You can customize decoder effects by setting the 
following parameters. For details about the types of 
decoders, see “Surround decode mode” (page 29).

■

Parameter for PLIIx Music and PLII Music

Panorama

Adjusts the soundscape of the front sound field. Sends 
stereo signals to the surround speakers as well as the front 
speakers for a wraparound effect.

Dimension

Adjusts the difference in level between the front sound 
field and the surround sound field. You can adjust the 
difference in level created by the software being played 
back to obtain the preferred sound balance. The surround 
sound gets stronger as you make the value more negative 
and the front sound gets stronger as you make the value 
more positive.

Center Width

You can spread the center sound toward left and right 
according to your preference. Set this parameter to 0 for 
outputting the center sound from the center speaker only, 
or to 7 for outputting it from the front left/right speaker.

■

Parameter for Neo:6 Music

Center Image

Adjusts the front left and right channel output relative to 
the center channel to make the center channel more or less 
dominant as necessary.

Protects the Setup menu settings against accidental 
alteration.

Note

•

When this parameter is switched to “On”, “

” appears at the top left 

corner of the Setup menu screen.

Adjustable range:

0 to100%

Parameters for certain sound field 
programs

Choices: 

PLIIx Movie (PLII Movie), Neo:6 Cinema

Choices: 

Auto*, Off

Auto Outputs sound by bypassing the DSP circuit and 

tone control circuit when the “Bass” and “Treble” 
tone controls are both set to 0 dB.

Off

Does not bypass the DSP circuit and tone control.

Adjustable range: 

0 to 100%

Time

Le

ve

l

Source sound

Reverb Level

(dB)

Rear reverberation

Choices: 

High*, Low

Decoder parameters

Choices: 

Off*, On

Adjustable range: 

–3 to STD* to +3

Adjustable range: 

0 to 3* to 7

Adjustable range: 

0.0 to 0.3* to 1.0

Memory Guard

Choices: 

Off*, On

Off

Not protect settings.

On

Protects the Setup menu settings (except for 
“Decode Type” in “DSP Parameter” and 
“Memory Guard”).