Yamaha RX-V2065 - Инструкция по эксплуатации - Страница 26

24

 En

BASIC OPERATION

1

Turn on external components (TV, DVD 
player, etc.) connected to this unit.

2

Rotate the 

T

INPUT

 selector (or press 

d

Input selection key

) to select an input 

source.

If you press 

d

USB/NET

 on the remote control, 

press 

w

Sub-input selection

key

 to select a 

sub-input source.
The name of the selected input source is displayed for 
a few seconds.

y

•

If you connect two video monitors to the HDMI OUT jacks of this 
unit, press 

g

HDMI OUT

 repeatedly to select the active video 

monitor(s) (page 42).

•

You can also select an input source from the GUI screen (page 25).

•

You can change the input source name displayed on the front panel 
display or GUI screen as necessary (page 53).

3

Play the external component that you have 
selected as the source input, or select a radio 
station on the tuner.

Refer to the operating instructions of the external 
component for details on playback. For selecting 
radio stations or playback of an iPod, Bluetooth 
component, USB storage device or network contents 
using this unit, see the following.

•

FM/AM radio tuning (page 31)

•

iPod playback (page 35)

•

Bluetooth component playback (page 37)

•

USB storage device playback (page 38)

•

Internet Radio playback (page 41)

•

PC playback (page 39)

4

Turn the 

K

VOLUME 

control (or press 

t

VOLUME +/–

) to adjust the volume.

This unit has a SCENE function that allows you to change 
input sources and sound field programs with one key. Four 
scenes are available for different usages, such as playing 
movies or music. The following input sources and sound 
field programs are provided as the initial factory settings.

y

•

When this unit is on standby, you can turn on this unit by pressing 

R

SCENE

 (or 

h

SCENE

).

•

If you connect a Yamaha DVD/CD player that has the capability of the 
SCENE control signals to the REMOTE OUT jack of this unit, you can 
start playback on the player by using the SCENE function.

Press 

R

SCENE

 (or 

h

SCENE

).

y

•

You can also select a SCENE from the GUI screen (page 25).

Select the desired input source/sound field 
program and then press and hold 

R

SCENE

 (or 

h

SCENE

) to edit until “SET Complete” appears 

on the front panel display.

y

•

If you change the input source setting, register the remote control code of 
an external component to the input source (page 61).

Playback

Basic procedure

VOL.

AV1 

Input source name

VOL.

SW
C

L

R

SL

SR

Volume-18.5dB

Volume

Note

When you play back a DTS-CD, noise may be output in some 

conditions, which may cause a speaker malfunction. Make sure 

that the volume is set to low before starting playback. If noise is 

output, do the following.

1) When only noise is output
If a DTS bitstream signal is not properly input to this unit, 
only noise is output. Connect the playback component to this 
unit by digital connection and play back the DTS-CD. If the 
condition is not improved, the problem may results from the 
playback component. Consult the manufacturer of the 
playback component.

2) When noise is output during playback or skip operation
Before playing back the DTS-CD, display the Option menu 
after selecting the input source and set “Decoder Mode” to 
“DTS” (page 43).

Using the SCENE function

Keys

Input source

Sound field program

BD/DVD

HDMI1

Straight

TV

AV1

Straight

CD

AV3

Straight

RADIO

TUNER

7ch Enhancer

Selecting a SCENE

Registering input source/sound field 
program to SCENE