Yamaha RX-V2065 - Инструкция по эксплуатации - Страница 55

53

 En

Operating various settings for this unit (Setup menu)

English

INTR

ODUCTION

AD
DITIONAL 

INFORMA

T

ION

APPENDIX

PRE

PARA

T

ION

BA
S

IC

OPERA

T

ION

AD
VANCED

OPERA

T

ION

■

Max Volume

Sets the maximum volume level so that the volume will 
not be accidentally increased. For example, you can adjust 
the volume between –80.0 dB and –5.0 dB (or Mute) when 
you set this parameter to “–5.0dB”. The volume increases 
to the maximum level when this parameter is set to +16.5 
dB (default).

■

Initial Volume

Sets the volume at the time this unit is turned on. When 
this parameter is set to “Off”, the volume level used when 
this unit was set to standby is applied.

Note

•

When you set “Max Volume” and “Initial Volume” the setting of “Max 
Volume” becomes effective. For example, when you set “Max Volume” 
to “–30.0dB” and “Init. Volume” to “0.0dB”, the volume is 
automatically set to “–30.0dB” at the next time this unit is turned on.

Changes input source names to be displayed on the front 
panel display. 

Selecting a name to be displayed from templates

Press 

j

Cursor

k

 / 

n

 to select the input source name to 

edit and then press 

j

Cursor

l

 / 

h

 to select a new 

name from the templates (Blu-ray, DVD, SetTopBox, 
etc.).

Entering an original name

Press 

j

Cursor

k

 / 

n

 to select the input source name to 

edit and then press 

j

ENTER

. Enter up to 9 characters 

by selecting one character at a time with the following key 
operations.

The following characters are available for input.
A to Z, 0 to 9, a to z, symbols (#, *, –, +, etc.) and space

Sets the maximum volume level and initial volume level 
of Zone2/3.

y

•

The menu items for Zone2 are available only when “Extra Speaker 
Assignment” is set to “Zone2” or “Zone2 + Zone3” (page 49).

•

The menu items for Zone3 are available only when “Extra Speaker 
Assignment” is set to “Zone2 + Zone3” (page 49).

■

Zone2/3 Max Volume

Sets the maximum volume level of Zone2/3, so that the 
volume will not be accidentally increased. For example, 
you can adjust the volume between –80.0 dB and –5.0 dB 
when you set this parameter to “–5.0dB”.

■

Zone2/3 Initial Volume

Use this feature to set the volume level of Zone2/3 when 
the power of Zone2/3 unit is turned on. When this 
parameter is set to “Off”, the volume level used at the time 
when the Zone2/3 unit was set to standby is applied.

Note

•

The “Zone2 Max Volume” or “Zone3 Max Volume” setting takes priority 
over the “Zone2 Initial Volume” or “Zone3 Initial Volume” setting. For 
example, if you set “Zone2 Max Volume” to “–30.0dB” and “Zone2 
Initial Volume” to “0.0dB”, the volume is automatically set to “–30.0dB” 
at the next time the Zone2 unit is turned on.

You can set items for network features.

■

IP Address

Sets the network parameters (IP address, etc).

DHCP

Select whether or not this unit obtain the network 
parameters (IP address, subnet mask, default gateway, 
primary DNS server and secondary DNS server) from the 
DHCP server of the connected network.

IP Address

Use this parameter to specify the IP address assigned to 
this unit. This value must not be the same as the one used 
for other devices in the target network.

Subnet Mask

Use this parameter to specify the subnet mask value 
assigned to this unit.

Default Gateway

Use this parameter to specify the IP address of the default 
gateway.

DNS Server (P) / DNS Server (S)

Use this parameter to specify the IP address of the primary 
and secondary DNS (Domain Name System) servers.

y

•

If you have only one DNS address, enter the DNS address in “DNS 
Server (P)”. If you have two or more DNS addresses, enter one of them in 
“DNS Server (P)” and another in “DNS Server (S)”.

■

MAC Address Filter

Sets MAC address filter to restrict access to this unit via 
LAN.

MAC Address Filter

Select whether or not to use the MAC address filter 
function.

Adjustable range: 

–30.0dB to +15.0dB, +16.5dB* (5.0 dB step)

Adjustable range:

Off*, Mute, –80.0dB to +16.5dB (0.5 dB step)

Input Rename

j

Cursor

l

 / 

h

Selects a character to edit.

j

Cursor

k

 / 

n

Selects a character to enter.

j

ENTER

Enters a selected character.

Zone

Adjustable range: 

–30.0dB to +15.0dB, +16.5dB* (5.0 dB step)

Adjustable range: 

Off*, Mute, –80.0dB to +16.5dB (0.5 dB step)

Network

Choices: 

On*, Off

On

Select this setting when this unit can obtain 
the network parameters from the DHCP 
server of the connected network.

Off

Select this setting when you set the network 
parameters manually.

Choices: 

Off*, On

Off

Disables the MAC address filter function.