Yamaha RX-V2065 - Инструкция по эксплуатации - Страница 52

50

 En

Operating various settings for this unit (Setup menu)

y

•

When “Surround Back Speaker” is set to “None”, “PLIIx Movie”, 
“PLIIx Music” and “PLIIx Game” of the surround decode mode 
(page 29) are not available.

Bass Crossover Frequency

Sets the lower limit of the low-frequency component 
output from a speaker with a size set to “Small” (Small x 
1, Small x 2) Sound with a frequency below that limit is 
output from a subwoofer or front speakers.
If your subwoofer has a volume control or a crossover 
frequency control, set the volume to half or the crossover 
frequency at the maximum.

Subwoofer Phase

Sets the phase of your subwoofer if bass sounds are 
lacking or unclear.

■

Speaker Level

Separately adjusts volume of each speaker so that the 
sounds form speakers are at the same volume at the 
listening position. Items to be displayed vary depending 
on the number of speakers connected.

y

•

When only one surround back speaker is connected, “SB” appears 
instead of “SBL” and “SBR”.

•

You can adjust the volume listening to test tones when you set “Test 
Tone” to “On” (on this page).

•

If your subwoofer has a volume control or a crossover frequency control, 
set the volume to half or the crossover frequency at the maximum.

■

Speaker Distance

Adjusts timing at which each speaker outputs sound so 
that sounds from speakers reach the listening position at 
the same time. Set unit (Unit) first and set the distance of 
each speaker.

Unit

FR.L / FR.R / CNTR / SUR.L / SUR.R / SBL / SBR / 
SWFR / PR.L / PR.R

y

•

Available items differ depending on the “Speaker Configuration” settings 
(page 48).

•

When only one surround back speaker is connected, “SB” appears 
instead of “SBL” and “SBR”.

■

Equalizer

Adjusts sound quality and tone using a parametric graphic 
equalizer.

EQ Type Select

Selects an equalizer type.

GEQ

Adjusts sound quality of each speaker using a graphic 
equalizer. The graphic equalizer of this unit can adjust 
signal levels in 7 frequency ranges. 
To adjust the signal level within each range, press 

j

Cursor

l

 / 

h

 to select the desired speaker while 

“Channel” is selected, press 

j

Cursor

k

 / 

n

 to select the 

desired frequency band and then press 

j

Cursor

l

 / 

h

to adjust the signal level.

■

Test Tone

Switches between on and off of an oscillator that generates 
test tones. When “On” is selected, you can adjust the 
settings of “Manual Setup” while listening to a test tone.

Choices: 

40Hz, 60Hz, 80Hz*, 90Hz, 100Hz, 110Hz, 120Hz, 

160Hz, 200Hz

Choices: 

Normal*, Reverse

Normal

Select this not to change the phase of your 
subwoofer.

Reverse

Select this to reverse the phase of your 
subwoofer.

Adjustable range: 

–10.0dB to +10.0dB (0.5dB step)

Defaults: 

0dB (FR.L, FR.R, SWFR, PR.L, PR.R)

–1.0dB (CNTR, SUR.L, SUR.R, SBL, SBR)

Choices: 

meters (m)*, feet (ft)

meters (m)

Displays the speaker distance in meters.

feet (ft)

Displays the speaker distance in feet.

Adjustable range: 

0.30m to 24.00m (1.0ft to 80.0ft)

Defaults: 

3.00m (10.0ft) (FR.L, FR.R, SWFR, PR.L, 

PR.R)

2.60m (8.5ft) (CNTR)

2.40m (8.0ft) (SUR.L, SUR.R, SBL, SBR)

Choices: 

Auto PEQ, GEQ*, Off

Auto PEQ

Uses a parametric equalizer selected in 
“Auto Setup”. Characteristics of the 
currently used parametric equalizer are 
displayed below “Auto PEQ”.

GEQ

Uses a graphic equalizer. Press 

j

ENTER

to adjust the characteristics of the graphic 
equalizer.

Off

Not use a graphic equalizer.

Channels

Front Left, Front Right, Center, Surround Left, 

Surround Right, Surround Back Left, Surround 

Back Right

Choices:

63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.3kHz, 

16kHz

Adjustable range: 

–6.0dB to 0dB* to +6.0dB (0.5dB step)

Choices: 

Off*, On

Off

Not generate test tones.

On

Generates test tones.