Bosch GWB 10 RE 0.601.132.703 - Инструкция по эксплуатации - Страница 12

 English | 

11

Bosch Power Tools

1 609 92A 0NL | (14.5.14)

Reversing the rotational direction



Actuate the rotational direction switch 1 only when the 
machine is at a standstill.

The rotational direction switch 

1

 is used to reverse the rota-

tional direction of the machine. However, this is not possible 
with the On/Off switch 

4

 actuated.

Right rotation:

 For drilling and driving in screws, push the ro-

tational direction switch 

1

 to “

R

”.

Left rotation:

 For loosening or unscrewing screws and nuts, 

push the rotational direction switch 

1

 to “

L

”.

Switching On and Off

To 

start

 the machine, firstly pull the 

On/Off switch 

4

 toward the rear and then 

press the On/Off switch 

4

.

To 

lock-on

, pull the On/Off switch 

4

 to-

ward the rear, press the On/Off switch 

4

and pull it further toward the rear.

To 

switch off

 the machine, release the On/Off switch 

4

. When 

the On/Off switch 

4

 is locked, press it first and then release it.

To save energy, only switch the power tool on when using it.

Adjusting the Speed

The speed of the switched on power tool can be variably ad-
justed, depending on how far the On/Off switch 

4

 is pressed.

Light pressure on the On/Off switch 

4

 results in a low rotation-

al speed. Further pressure on the switch results in an increase 
in speed.

Preselecting the Speed

The required speed can be preselected with the thumbwheel 

2

 (also while running).

Working Advice



Before any work on the machine itself, pull the mains 
plug.



Apply the power tool to the screw/nut only when it is 
switched off. 

Rotating tool inserts can slip off.

Tips

After longer periods of working at low speed, allow the ma-
chine to cool down by running it for approx. 3 minutes at max-
imum speed with no load.

For drilling in metal, use only perfectly sharpened HSS drill 
bits (HSS = high-speed steel). The appropriate quality is guar-
anteed by the Bosch accessories program.

Twist drills from 2.5 – 10 mm can easily be sharpened with 
the drill bit sharpener (see accessories).

Maintenance and Service

Maintenance and Cleaning



Before any work on the machine itself, pull the mains 
plug.



For safe and proper working, always keep the machine 
and ventilation slots clean.

If the replacement of the supply cord is necessary, this has to 
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.

After-sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare 
parts. Exploded views and information on spare parts can al-
so be found under:

www.bosch-pt.com

Bosch’s application service team will gladly answer questions 
concerning our products and their accessories.

In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of 
the machine.

Great Britain

Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange 
the collection of a product in need of servicing or repair. 
Tel. Service: (0844) 7360109
E-Mail: boschservicecentre@bosch.com

Ireland

Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au

Republic of South Africa
Customer service

Hotline: (011) 6519600

O

I

F

O

I

OBJ_BUCH-1691-002.book  Page 11  Wednesday, May 14, 2014  10:11 AM