Bosch GWS 22 230 JH 0601882203 - Инструкция по эксплуатации - Страница 22

 English | 

23

Bosch Power Tools

1 609 929 X88 | (8.2.12)

Switch on the machine 

and place the front part 

of the cutting guide on 

the workpiece. Slide the 

machine with moderate 

feed, adapted to the ma-

terial to be worked.

For cutting expecially hard material, e. g., concrete with high 

pebble content, the diamond cutting disc can overheat and 

become damaged as a result. This is clearly indicated by cir-

cular sparking, rotating with the diamond cutting disc.

In this case, interrupt the cutting process and allow the dia-

mond cutting disc to cool by running the machine for a short 

time at maximum speed with no load.
Noticeable decreasing work progress and circular sparking 

are indications of a diamond cutting disc that has become 

dull. Briefly cutting into abrasive material (e. g. lime-sand 

brick) can resharpen the disc again.

Information on Structures

Slots in structural walls are subject to the Standard DIN 1053 

Part 1, or country-specific regulations.

These regulations are to be observed under all circumstanc-

es. Before beginning work, consult the responsible structural 

engineer, architect or the construction supervisor.

Maintenance and Service

Maintenance and Cleaning

f

Before any work on the machine itself, pull the mains 

plug.

f

For safe and proper working, always keep the machine 

and ventilation slots clean.

f

In extreme conditions, always use dust extraction as 

far as possible. Blow out ventilation slots frequently 

and install a residual current device (RCD). 

When work-

ing metals, conductive dust can settle in the interior of the 

power tool. The total insulation of the power tool can be im-

paired.

Please store and handle the accessory(-ies) carefully.
If the replacement of the supply cord is necessary, this has to 

be done by Bosch or an authorized Bosch service agent in or-

der to avoid a safety hazard.
If the machine should fail despite the care taken in manufac-

turing and testing procedures, repair should be carried out by 

an after-sales service centre for Bosch power tools.
In all correspondence and spare parts order, please always in-

clude the 10-digit article number given on the type plate of 

the machine.

After-sales Service and Customer Assistance

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare 

parts. Exploded views and information on spare parts can al-

so be found under:

www.bosch-pt.com

Our customer service representatives can answer your ques-

tions concerning possible applications and adjustment of 

products and accessories.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham

Uxbridge

UB 9 5HJ

Tel. Service: +44 (0844) 736 0109

Fax: +44 (0844) 736 0146

E-Mail: boschservicecentre@bosch.com

Ireland

Origo Ltd.

Unit 23 Magna Drive

Magna Business Park

City West

Dublin 24

Tel. Service: +353 (01) 4 66 67 00

Fax: +353 (01) 4 66 68 88

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd.

Power Tools

Locked Bag 66

Clayton South VIC 3169

Customer Contact Center

Inside Australia:

Phone: +61 (01300) 307 044

Fax: +61 (01300) 307 045

Inside New Zealand:

Phone: +64 (0800) 543 353

Fax: +64 (0800) 428 570

Outside AU and NZ:

Phone: +61 (03) 9541 5555

www.bosch.com.au

Republic of South Africa
Customer service

Hotline: +27 (011) 6 51 96 00

Gauteng – BSC Service Centre

35 Roper Street, New Centre

Johannesburg

Tel.: +27 (011) 4 93 93 75

Fax: +27 (011) 4 93 01 26

E-Mail: bsctools@icon.co.za

OBJ_BUCH-777-008.book  Page 23  Wednesday, February 8, 2012  8:04 AM