Bosch GWS 15-125 CIH - Инструкция по эксплуатации - Страница 23

24

 | English 

1 609 92A 16W | (12.2.15)

Bosch Power Tools

For cutting stone, it is best to use a diamond cutting disc.

When using the cutting guide with dust extraction protection 
guard 

21

, the vacuum cleaner must be approved for vacuum-

ing masonry dust. Suitable vacuum cleaners are available 
from Bosch.

Switch on the machine 
and place the front part 
of the cutting guide on 
the workpiece. Slide the 
machine with moderate 
feed, adapted to the ma-
terial to be worked.

For cutting especially hard material, e. g., concrete with high 
pebble content, the diamond cutting disc can overheat and 
become damaged as a result. This is clearly indicated by cir-
cular sparking, rotating with the diamond cutting disc.
In this case, interrupt the cutting process and allow the dia-
mond cutting disc to cool by running the machine for a short 
time at maximum speed with no load.

Noticeably decreasing work progress and circular sparking 
are indications of a diamond cutting disc that has become 
dull. Briefly cutting into abrasive material (e. g. lime-sand 
brick) can resharpen the disc again.

Information on Structures

Slots in structural walls are subject to the Standard DIN 1053 
Part 1, or country-specific regulations.
These regulations are to be observed under all circumstanc-
es. Before beginning work, consult the responsible structural 
engineer, architect or the construction supervisor.

Maintenance and Service

Maintenance and Cleaning



Before any work on the machine itself, pull the mains 
plug.



For safe and proper working, always keep the machine 
and ventilation slots clean.



In extreme conditions, always use dust extraction as 
far as possible. Blow out ventilation slots frequently 
and install a portable residual current device (PRCD). 

When working metals, conductive dust can settle in the in-
terior of the power tool. The total insulation of the power 
tool can be impaired.

If the replacement of the supply cord is necessary, this has to 
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.

Please store and handle the accessory(-ies) carefully.

After-sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare 
parts. Exploded views and information on spare parts can al-
so be found under:

www.bosch-pt.com

Bosch’s application service team will gladly answer questions 
concerning our products and their accessories.

In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of 
the machine.

Great Britain

Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange 
the collection of a product in need of servicing or repair. 
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com

Ireland

Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au

Republic of South Africa
Customer service

Hotline: (011) 6519600

Gauteng – BSC Service Centre

35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za

OBJ_BUCH-165-007.book  Page 24  Thursday, February 12, 2015  10:55 AM