V-ZUG HSL CSTHSLZ60 - Инструкция по эксплуатации - Страница 50

13 Accessories and spare parts

… the following appears in the display

Descaling failed
Appliance was not descaled.

Possible cause

Solution

▪

Used unsuitable descaler.

▸ Descale again using the recommended descaler.

▪

Descaling was not carried out
correctly.

▸ If the message does not disappear after repeating

the descaling process several times, note down
the error message in full along with the SN number
(see identification plate).

▸ Call Customer Services.

12.2 

After a power failure

The user settings remain unchanged.

Brief power failure during operation

–

The current operation of the appliance is cancelled. 

–

The following appears in the display when the appliance is switched on: «Power
failure. Operation cancelled».

▸ To cancel the message, select  .

–

The operating modes menu appears in the display.

Brief power failure during descaling

–

The descaling process is interrupted.

–

The following appears in the display when the appliance is switched on: « Power
failure. Continuing descaling.»

▸ To confirm the message, select  .

–

The descaling process continues.

Prolonged power failure

The appliance goes through its initial set-up process after a prolonged power failure.
However, only the language and time need to be reset to enable the appliance to be op-
erated again. It is not necessary to make any other settings.

–

If a descaling process was running, the descaling process continues.

13 

Accessories and spare parts

The accessories listed below, as well as spare parts, can be ordered in addition to the
scope of delivery of the appliance. Ordering is subject to charge, except in the event of
warranty claims. Please give product family of the appliance and exact designation of the
accessory or spare part when ordering parts.

50