V-ZUG HSL CSTHSLZ60 - Инструкция по эксплуатации - Страница 19

5 Using the appliance

▸ If a new operating mode is to be started: Press the 

 touch button.

▸ If the appliance is to be switched off: Press the   touch button.

5.8 

Changing the operating mode

If no operating mode is running:
▸ Select 

 in the settings of the current operating mode.

–

The operating modes menu is displayed.

If an operating mode is already running:
▸ Select   or press the   touch button.

–

The set operating mode is cancelled.

▸ Press the 

 touch button and select a new operating mode.

5.9 

Timer

The timer functions like an egg timer. It can be used at any time and independently of all
other functions.

Setting and starting the timer

▸ Press the   touch button.

–

A suggested value of «10min» appears in the display.

▸ Turn the adjusting knob and set the desired duration.

–

The duration and the end time for the timer appear in the display.

The timer can be set for:

▪

up to 10 minutes in 10-second intervals, e.g. = 9 minutes and 50 seconds;

▪

over 10 minutes in 1-minute intervals, e.g. = 1 hour and 12 minutes;

▪

over 10 hours in 1-hour intervals, e.g. = 18 hours.

The maximum timer duration is 99 hours.
▸ Press the adjusting knob to confirm.

–

The timer starts.

–

If there is no operating mode running with a set duration, the remaining time on the
timer will be displayed in the digital display.

–

The   touch button is illuminated in white.

–

If the appliance was in another menu before the timer was set, e.g. operating
modes: the menu or the submenu selected within it, e.g. a running operating mode,
appears.

–

If the appliance was not in another menu: the display goes black.

Checking and changing

▸ Press the   touch button.

–

The countdown to the time remaining appears in the display.

▸ Shorten or extend the time by turning the adjusting knob.
▸ Confirm this shortening or extending of the time.

When the timer finishes

When the set duration is up:

–

An acoustic signal is emitted.

–

«Timer finished» appears in the display.

▸ To close the message, select  .

19