V-ZUG HSL CSTHSLZ60 - Инструкция по эксплуатации - Страница 44

11 Care and maintenance

11.6 

Replacing the halogen light bulb

WARNING: Risk of electric shock!
Disconnect the appliance from the mains power supply before replacing the halo-
gen light bulb. 
Risk of burns from hot surfaces!
Allow the halogen light bulb and the appliance to cool down before replacing the
halogen light bulb.

Do not touch the halogen light bulb with bare hands. Instead, use a fine, dry,
grease-free cloth.

Failure to fit the glass light cover and seals properly may cause a malfunction or
damage to the appliance. Any defective parts, especially seals that have become
brittle, must be replaced with original spare parts. If you are unsure, please contact
Customer Services.

Lateral illumination

▸ Remove the left shelf guide.
▸ Using a screwdriver, unscrew the four screws 

2

in the fixture.

▸ Place the screwdriver 

3

 along the middle of the

edge of the fixture and carefully remove the fix-
ture together with the seal from the cooking
space wall.

▸ Take out the faulty halogen light bulb.
▸ Carefully plug the new halogen light bulb into

the socket – halogen type G9 / 25 W / 230 V.

▸ Screw the fixture back into the cooking space

wall.

–

If the glass light cover, seal and fixture come
apart when removed: centre the glass light
cover in the fixture, then place the seal in
the fixture and insert the screws through the
fixture and the seal.

▸ Switch the power supply back on.

2

3

11.7 

Cleaning the accessories and shelf guides

Incorrect handling can cause damage!

Do not clean the food probe or water tank in the dishwasher.

▪

The stainless steel tray, the perforated cooking tray, the wire shelf and the shelf
guides can be cleaned in the dishwasher.

▪

Watermarks in the water tank can be removed using a standard descaler (do not use
washing-up liquid!).

▸ Clean the food probe with a soft cloth dampened with water and a little washing-up li-

quid.

▸ If the water tank valve drips, descale it.

44