V-ZUG HSL CSTHSLZ60 - Инструкция по эксплуатации - Страница 16

5 Using the appliance

5.2 

Selecting and starting the operating mode

▸ If the appliance is switched off: first press the adjusting knob.
▸ If the appliance is in another menu: press the 

 touch button.

–

The selection of operating modes appears in the display.

▸ Select the operating mode.

–

The operating mode settings appear in the display; a recommended value appears
above the temperature.

▸ Set the values for duration, end time, temperature and target temperature as required

and confirm.

Press and go

Once all the necessary settings for the operating mode have been made, a bar appears
in the display and counts down 20 seconds. If no further settings are made during this
time, operation starts automatically. If a setting is changed, Press and go starts again.

The duration of Press and go can be adjusted (see page 40) or it can be deactiv-
ated in the user settings.

▸ To start operation immediately, i.e. without Press and go, select  .

–

If set, the countdown to the time remaining appears in the display and in the digital
display.

The operating mode selected cannot be changed once it has started.

Display overview

곍6HWWHPSHUDWXUH

굴

굵

굶

K

3

1

2

4

6

5

1

Operating mode settings

2

Press and go

3

Operating mode with symbol

4

Current position of the adjusting knob / 
selected setting

5

Set values / recommended values

6

Symbols for settings

5.3 

Checking and changing the settings

▸ Select the symbol for the desired setting.
▸ To change the value, turn the adjusting knob to the right or left.
▸ Press the adjusting knob to confirm the setting.

–

The operating mode settings are displayed.

–

The changed value can be seen above the corresponding symbol.

The end time can only be changed during the first 60 seconds of 
operation.

16