Fulgor Milano FUO 6009 MT MBK - Инструкция по эксплуатации - Страница 42

EN

4

2 - Installation of the oven

To install the oven into the kitchen a cutout should be made in 

accordance with the dimensions shown in Fig. 1.

The apparatus is to be fastened to the top by means of the two 

screws provided in the kit through the holes made on the oven 

uprights.

The cabinet in which the apparatus is installed shall be open 

on the back side to ensure a sufficient air circulation and 

prevent overheating.

Leave a gap of at least 200 cm

2

 (see Fig. 1) for air circulation 

if the oven is installed in a column; this is not necessary if the 

oven is installed under the work top.

WARNING

As the apparatus is to be fitted in your kitchen 

furniture, make sure that all surfaces in contact 

with the oven can resist a temperature of approx 

90°C.

Electricals

Absorbed power:

oven top element:

1200+1000W 230V - 

1200+1000W 240V

oven bottom element:

1100W 230V - 1100W 240V

round element (hot air):

2300W 230V - 2300W 240V

(on some models)

roasting jack motor:

4 W

(on some models)

lamp:

25 W

hot air fan motor:

25 W

cooling fan motor:

25 W

Maximum absorbed power:

(see data plate)

Supply voltage:

(see data plate)

NOTE: 

This appliance is in compliance with following European 

directives: 2006/95/CE (LVD), 2004/108/CE (EMC), 

2011/65/CE (RoHS), 2012/19/UE (WEEE), 2002/40/CE.