Sony CCD-TR820E / CCD-TR825E - Инструкция по эксплуатации - Страница 90

89

Additional Information / 

Дополнительная информация

Symptom

The cassette cannot be removed
from the holder.

{

 and 

6

 indicators flash and no

function except for cassette
ejection works.

The counter, date, or time
indicator is flashing.

The tape does not move when a
video control button is pressed.

The SteadyShot function does not
activate.

The autofocusing function does
not work.

The fader function does not
activate.

No sound or only a low sound is
heard when playing back a tape.

Excessive high-pitched sound is
heard.

Data code becomes “--:--:--”.
(CCD-TR825E only)

The date or time indicator
disappears.

(to be continued)

Cause and/or Corrective Action

• The battery is dead.

m

Use a charged battery pack or the AC power adaptor. (p.8, 28)

• Moisture condensation has occurred.

m

Remove the cassette and leave the camcorder for at least 1
hour. (p.81)

• You pressed DATE and TIME together for more than 2 seconds.

m

The camcorder is not malfunctioning. You may start recording.
Flashing will stop soon.

• The lithium battery is weak or dead.

m

Replace the lithium battery with a new one. (p.72)

• The POWER switch is set to CAMERA or OFF.

m

Set it to PLAYER.

• The tape has run out.

m

Rewind the tape or use a new one. (p.24)

• STEADY SHOT is set to OFF.

m

Set STEADY SHOT to ON. (p.57)

• The SteadyShot function does not work when the wide mode is

set to 16:9 FULL.

• FOCUS is set to MANUAL.

m

Set it to AUTO. (p.43)

• Shooting conditions are not suitable for autofocus.

m

Set FOCUS to MANUAL to focus manually. (p.43)

• START/STOP MODE is set to 5 SEC or ANTI GROUND

SHOOTING

.

m

Set it to 

. (p.18)

• A title is displayed.

m

Stop superimposing the title.

• The stereo tape is played back with HiFi SOUND set to 1 or 2 in

the menu system.

m

Set to STEREO in the menu system. (p.35)

• The picture has been recorded with WIND set to ON in the menu

system.

m

When there is no wind, set it to OFF. (p.33)

• You are playing back a portion of tape on which you wrote or

erased the index signal.  This is not a malfunction. (p. 67)

• Reset the date and time. (p.72)

Trouble check