Yamaha RX-V465 - Инструкция по эксплуатации - Страница 44

42

 En

Operating various settings for this unit (Setup menu)

Low-frequency components of other channel 
signals

Front

Sets the sizes of front left and right speakers.

Note

•

When “Bass Out” is set to “Front,” you can only select “Large.” If “Bass 
Out” is changed to “Front,” “Front” automatically switches to “Large” 
even when it is set to “Small.”

Center

Sets the size of center speaker.

Sur. LR

Sets sizes of left and right surround speakers.

y

•

When “None” is selected, the sound field programs automatically enter 
the Virtual CINEMA DSP mode.

Sur. B

Sets sizes of left and right surround back speakers. When 
using the surround back speakers, connect an external 
amplifier to the SURROUND BACK jacks of the PRE 
OUT terminals.

y

•

When “None” is selected, “PLIIx Movie,” “PLIIx Music,” and “PLIIx 
Game” cannot be selected.

Crossover

Sets the lower limit of the low frequency component 
output from a speaker with a size set to “Small (SMLx1/
SMLx2).” Sound with a frequency below that limit is 
output from a subwoofer or front speakers. 
If your subwoofer has a volume control or a crossover 
frequency control, set the volume to half or the crossover 
frequency at the maximum.

SWFR Phase

Sets the phase of your subwoofer if bass sounds are 
lacking or unclear.

Parameter

Subwoofer

Front 

speakers

Other 

speakers

Both

[1]

[2]

[3]

SWFR

[4]

[3]

[3]

Front

Not output

[1]

[3]

[1]

Outputs low-frequency components of the front left and right 

channels and the channel of speaker, the size of which is set to 

“Small.”

[2]

Outputs low-frequency components of the front left and right 

channels.

[3]

Outputs low frequency components when the sizes of speakers 

are set to “Large.”

[4]

Outputs low-frequency components of the channel of speaker, 

the size of which is set to “Small.”

Choices: 

Small

/

Large

*

Small

Select this when small speakers are 
connected. Low-frequency components of the 
front left and right channels are output from a 
subwoofer.

Large

Select this when large speakers are 
connected.

Choices: 

None

/

Small

*/

Large

None

Select this when no center speaker is 
connected. Center channel signals are spread 
to front left and right speakers.

Small

Select this when a small center speaker is 
connected. Low-frequency components of 
center channel are output from a subwoofer. 
If a subwoofer is not connected they are 
output from front speakers.

Large

Select this when a large center speaker is 
connected.

Choices: 

None

/

Small

*/

Large

None

Select this when no surround speakers are 
connected. Surround channel signals are 
spread to front left and right speakers. 
“Sur.B” automatically switches to “None” 
when this is selected.

Small

Select this when small surround speakers are 
connected. Low-frequency components of 
surround channels are output from a 
subwoofer. If a subwoofer is not connected 
they are output from front speakers.

Large

Select this when large surround speakers are 
connected.

Choices: 

None

*/

SMLx1

/

SMLx2

/

LRGx1

/

LRGx2

None

Select this when no surround back speaker 
are connected. Surround back channel signals 
are output from the surround L/R speakers 
and subwoofer. If the subwoofer is disabled, 
they are output from the surround L/R 
speakers and front speakers.

SMLx1

Select this when one small surround back 
speaker is connected to an external amplifier 
for the surround back speaker.

SMLx2

Select this when two small surround back 
speakers are connected to an external 
amplifier for the surround back speakers.

LRGx1

Select this when one large surround back 
speaker is connected to an external amplifier 
for the surround back speaker.

LRGx2

Select this when two large surround back 
speakers are connected to an external 
amplifier for the surround back speakers.

Choices: 

40Hz

/

60Hz

/

80Hz

*/

90Hz

/

100Hz

/

110Hz

/

120Hz

/

160Hz

/

200Hz

Choices: 

NRM

*/

REV

NRM

Select this not to change the phase of your 
subwoofer.

REV

Select this to reverse the phase of your 
subwoofer.