Yamaha RX-V465 - Инструкция по эксплуатации - Страница 40

3

8

 En

When using sound field programs for movies or TV 
programs, you can select a surround decoder to be used 
with the sound field program after setting the parameters 
from the following decoders. To set the parameters for 
sound field programs, see the following section.

Decoders that can be used with a sound field 
program

•

PLIIx Movie (PLII Movie) 

•

Neo:6 Cinema

Note

•

The following MOVIE sound field programs cannot be used with a 
surround decoder.

–

Mono Movie

–

Sports

–

Action Game

–

Roleplaying Game

Although the field sound programs would satisfy you as 
they are with the default parameters, you can arrange 
sound effect or decoders suitable for acoustical conditions 
of sources or rooms by setting the parameters (sound field 
elements).

y

•

You can protect the sound field against the changes of parameters the 
sound filed parameters when “Memory Guard” of the setup menu is set 
to “On” (see page 45). To change the parameters, set it to “Off.”

1

Press 

l

SETUP

 on the remote control.

The setup menu appears on the front panel display.

2

Press 

n

Cursor

k

 / 

n

 to select “DSP 

Parameter” and press 

n

ENTER

.

The screen changes as follows.

3

Press 

n

Cursor

l

 / 

h

 to select the sound 

field program.

4

Press 

n

Cursor

k

 / 

n

 to select the parameter 

that you want to change, and press 

n

Cursor

l

 / 

h

 to change the parameter. 

You can change the parameter display in the 
following order by pressing 

n

Cursor

n

 repeatedly.

•

sound field program

•

surround decoder

•

sound field parameter

For sound field parameters, see “Sound field 
parameters” on this page.

y

•

Repeat steps 4 and 5 to change other sound field program 
parameters.

5

To end the edit, press 

l

SETUP

.

y

•

The default settings are marked with “*.”

DSP Level

Fine adjusts an effect level (level of the sound field effect 
to be added). You can adjust the level of the sound field 
effect while checking sound levels. Adjust “DSP Level” as 
follows.

•

The effect sound is too soft.

•

There are no differences between effects of the sound 
field programs. 

→

Increase the effect level.

•

The sound is dull.

•

The sound field effect is added too much. 

→

Reduce the effect level.

■

2ch Stereo only

Direct

Automatically bypasses the DSP circuit and tone control 
circuit when an analog sound source is selected as the 
input source. You can enjoy a higher quality sound.

■

7ch Stereo only

CT Level

/

SL Level

/

SR Level

/

SB Level

Adjusts the volume of the center (CT), surround L (SL) 
surround R (SR) and surround back (SB) channels in the 
7ch Stereo program. The available parameters differ 
depending on the setting of the speakers.

Editing surround decoders/sound field programs

Selecting a decoder used with a sound 
field program

Setting sound field parameters

P R M : S c i - F i

Sound field program

To initialize the parameters of the selected sound field 
program, 

n

Cursor

n

 repeatedly to select “Initialize” 

and then press, 

n

Cursor

h

. When “Press Again

h

” 

appears on the front panel display, press 

n

Cursor

h

again, press 

n

Cursor

h

 to confirm the initialization 

or 

n

Cursor

l

 to cancel it.

Sound field parameters

CINEMA DSP parameters

Adjustable range:

-6 dB

 to 

0 dB

* to 

+3 dB

Parameters only usable in certain sound 
field programs

Choices: 

Auto

*/

Off

Auto

Outputs sound by bypassing the DSP circuit and 
tone control circuit when the “Bass” and “Treble” 
tone controls are both set to 0 dB.

Off

Do not bypass the DSP circuit and tone control 
circuit.

Adjustable range: 

0

 to 

100%