Yamaha RX-V465 - Инструкция по эксплуатации - Страница 36

34

 En

You can connect a Yamaha Bluetooth wireless audio receiver (such as YBA-10, sold separately) to the DOCK terminal of 
this unit and enjoy the music contents stored in your Bluetooth component (such as a portable music player) without 
wiring between this unit and the Bluetooth component. You need to perform “Pairing” the connected Bluetooth wireless 
audio receiver and your Bluetooth component in advance.

Note

•

This unit supports A2DP (Advanced Audio Distribution Profile) of the Bluetooth profile.

“Pairing” refers to the operation of registering a Bluetooth 
component for Bluetooth communications. Pairing must 
be performed when using a Bluetooth component with the 
Bluetooth wireless audio receiver connected to this unit 
for the first time or if the pairing data has been deleted.

y

•

You only need the pairing operation for the first time that you use the 
Bluetooth component with the Bluetooth wireless audio receiver.

•

Pairing requires operations on this unit and on the other component with 
which Bluetooth communications are to be established. If necessary, 
refer to the other component’s operating instructions.

■

Pairing the Bluetooth wireless audio receiver 
and your Bluetooth component

1

Change the input source to “DOCK” using 

N

INPUT

l

 / 

h

 (or 

g

DOCK

).

2

Turn on the Bluetooth component you want 
to pair with and set it to pairing mode.

For details on operation of the Bluetooth component, 
refer to its operating instructions.

3

Press 

m

OPTION

.

The option menu for DOCK input appears on the 
front panel display.

4

Press 

n

Cursor

n

 to select “Pairing” and 

press 

n

ENTER

.

“Searching” appears on the front panel display and 
the pairing operation starts.

y

•

To cancel pairing, press 

n

RETURN

.

•

You can also start pairing operation by pressing and holding 

D

MEMORY

 on the front panel.

5

Make sure the Bluetooth component 
recognizes the Bluetooth wireless audio 
receiver.

If the Bluetooth have recognized the Bluetooth 
wireless audio receiver, “YBA-10 YAMAHA,” for 
instance, is displayed in the Bluetooth device list.

6

Select the Bluetooth wireless audio receiver 
from the Bluetooth device list, and enter a 
path key “0000” into the Bluetooth 
component.

When pairing is complete, “Completed” appears on 
the front panel display.

y

•

The Yamaha Bluetooth wireless audio receiver can be paired with up to 
eight Bluetooth components. When pairing is conducted successfully 
with a ninth component and the pairing data is registered, the pairing data 
for the least recently used other component is cleared.

1

Change the input source to “DOCK” using 

N

INPUT

l

 / 

h

 (or 

g

DOCK

).

2

Press 

m

OPTION

.

3

Press 

n

Cursor

n

 repeatedly to select 

“Connect” and press 

n

ENTER

.

After you execute “Connect,” communication with 
the Bluetooth component is established. When the 
connected Bluetooth wireless audio receiver 
recognizes the Bluetooth component, “BT 
Connected” appears on the front panel display.

y

•

When you press 

n

ENTER

 on the remote control, the connected 

Bluetooth wireless audio receiver searches and connects to the last 
connected Bluetooth component. If the Bluetooth wireless audio 
receiver cannot find the Bluetooth component, “Not found” 
appears on the front panel display.

•

To disconnect the Bluetooth wireless audio receiver from the 
Bluetooth component, display the option menu again, select 
“Disconnect,” and press 

n

ENTER

.

4

Start playback of the Bluetooth component.

Using Bluetooth™ components

Pairing the Bluetooth™ wireless audio 
receiver and your Bluetooth™ 
component

To ensure security, a time limit of 8 minutes is set for 
the pairing operation. You are recommended to read 
and fully understand all the instructions before starting.

Playback of the Bluetooth™ 
component