Yamaha RX-V465 - Инструкция по эксплуатации - Страница 24

22

 En

Playback

2

Press 

g

Input selection keys

 on the 

remote control for the input source whose 
remote control code was registered in step 1 
for about 3 seconds while pressing down 

k

SCENE

 key whose assignment you want 

to change.

The external component can now be controlled 
remotely just by selecting a scene.

1

Press 

q

MUTE

 on the remote control to mute 

the audio output.

The MUTE indicator on the front panel display 
flashes while audio output is muted.

2

Press 

q

MUTE

 again to resume audio 

output.

You can adjust the balance of the high frequency range 
(Treble) and low frequency range (Bass) of sounds output 
from the front left and right speakers to obtain desired 
tone.

y

•

The tone control of the speakers or headphones can be set separately. Set 
the headphone tone control with the headphones connected.

1

Press 

J

TONE CONTROL

 on the front panel 

repeatedly to select “Treble” or “Bass.”

The current setting is displayed on the front panel 
display.

2

Adjust the frequency range using 

K

PROGRAM

l

 / 

h

.

Control range: –10.0 dB to +10.0 dB
The display returns the previous screen soon after you 
release the key.

Notes

•

The tone control settings are not effective during playback in direct 
mode.

•

If you set the balance extremely off, sounds may not match those from 
other channels well.

Use Direct mode to enjoy the pure high fidelity sound of 
the selected source. When Direct mode is activated, this 
unit plays back the selected source with the least circuitry.

Press 

M

DIRECT

 (or 

j

DIRECT

) to turn the 

Direct mode on or off.

The following features are disabled in Direct mode.

–

sound field program, tone control

–

display and operation of the option menu and setup 
menu

y

•

While direct mode is on, the front panel display becomes dim. When 
setting it back off, the brightness of the front panel display returns to the 
previous setting.

The sleep timer is useful if you want to go to sleep while 
this unit is playing or recording a source.

Press 

e

SLEEP

 repeatedly to set the amount of 

time.

Each time you press 

e

SLEEP

, the front panel display 

changes as shown below.

When the sleep timer is set, the SLEEP indicator on the 
front panel display lights up. 
Press 

e

SLEEP

 on the remote control repeatedly until 

“Sleep Off” appears on the front panel display.

Plug your headphones in the 

B

PHONES

 jack on 

the front panel.

When you select a sound field program while using the 
headphones, the mode is automatically set to SILENT 
CINEMA mode.

Notes

•

When you connect headphones, no signals are output at the speaker 
terminals.

•

When multi-channel signals are processed, sounds in all channels are 
divided to left and right channels.

Muting audio output temporarily 
(MUTE)

Adjusting high/low frequency sound 
(tone control)

Treble

0 . 0 d B

Enjoying pure hi-fi sound

Using the sleep timer

Using your headphones

Sleep 120min.

Sleep 90min.

Sleep 60min.

Sleep 30min.

Sleep Off