Yamaha DV-C6860 - Инструкция по эксплуатации - Страница 27

23 

En

English

Setup Menu

Setting the analog output

Set the analog output to match the 
playback capability of this unit.

1

In “AUDIO SETUP PAGE”, press 

3

/

4

 to 

highlight [ANALOG OUTPUT], and then 
press 

2

.

STEREO

Select this to change the channel output to 
stereo, which only delivers sound from the 
two front speakers.

LT/RT

Select this if this unit is connected to a 
Dolby Pro Logic decoder.

2

Press 

3

/

4

 to select a setting, and then 

press 

ENTER/OK 

to confirm your 

selection.

Setting the digital output

The [DIGITAL AUDIO] options are: 
“DIGITAL OUTPUT” and “LPCM 
OUTPUT”.

1

In “AUDIO SETUP PAGE”, press 

3

/

4

 to 

highlight [DIGITAL AUDIO], and then 
press 

2

.

2

Press 

3

/

4

 to highlight an option.

3

Press 

2

 to enter a submenu.

DIGITAL OUTPUT

Set the digital output according to your 
optional audio component connections.

OFF

Select this to turn off the digital output.

ALL

Select this if you have connected the digital 
audio output jack to a multi-channel 
decoder/receiver.

PCM ONLY

Select this only if your receiver is not 
capable of decoding multi-channel audio 
signals.

Note:
– If your receiver cannot decode DTS, no 

sound output from DTS signals in any 
mode.

LPCM OUTPUT

Select this if you have connected this unit 
to a PCM-compatible receiver via a digital 
terminal, such as the coaxial terminal. In 
this case, you may need to adjust “LPCM 
OUTPUT”.
Discs are recorded at a certain sampling 
rate. The higher the sampling rate, the 
better the sound quality.

48KHz

Select this to play back discs recorded at 
the sampling rate of 48 kHz. All 96 kHz 
PCM data streams (if available) are 
converted to the sampling rate of 48 kHz.

96KHz

Select this to play back discs recorded at 
the sampling rate of 96 kHz. If the 96 kHz 
disc is copy protected, the digital output is 
automatically converted to the sampling 
rate of 48 kHz.

4

Press 

3

/

4

 to select a setting, and then 

press 

ENTER/OK 

to confirm your 

selection.

TIPS:

To return to the previous menu, press 

1

. 

To exit from the menu, press 

SETUP

.