Gardena ErgoJet 3000 - Инструкция по эксплуатации - Страница 25

6. Maintenance

WARNING:

 Stop the unit and disconnect the plug from the power source 

before making any adjustments, changing accessories, or performing 
 maintenance. 
Such preventive safety measures reduce the risk of starting the power tool 
 accidentally.

BEFORE EACH USE

Check for loose fasteners 
and parts:

Keep all nuts, bolts and screws tight to be sure the product is 
in a safe working condition. Be sure all parts are assembled 
 properly.

• Inlet Cover

• Blower Tube

• Vacuum Tubes

• Collection Bag

Check for damaged or 
worn parts:

Contact your authorized service dealer for replacement of 
 damaged or worn parts.

•  ON/OFF Switch – Ensure switch functions properly by moving 

the switch to the OFF position. Make sure motor stops; 
then restart motor and continue.

•  Inlet Cover – Discontinue use of unit if inlet cover fails to latch 

properly or if it is damaged in any way.

AFTER EACH USE

Inspect and clean unit 
and labels:

•  After each use, inspect complete unit for loose or damaged 

parts. Clean the unit using a damp cloth.

• Wipe off unit with a clean dry cloth.

Clean collection bag:

IMPORTANT:

 THE COLLECTION BAG MUST BE PROPERLY 

EMPTIED.

•  You must properly empty and maintain the collection bag to 

avoid deterioration and obstruction of air flow.

•  Remove the collection bag from the unit and empty after each 

use. Do not store bag without emptying the bag of all contents 
(grass, leaves, etc.).

•  Wash the bag once a year. Remove the bag from the blower 

and turn the bag inside out. Wash the bag with a water hose. 
Allow the bag to hang and dry completely before you reuse 
the bag.

25

GB

9332-20.960.01.indd   25

04.01.12   07:47