Набор аккумуляторных инструментов SKIL F0150078AR - Инструкция по эксплуатации - Страница 8

8

b) 

Do not use the power tool if the switch does not 

turn it on and of.

 Any power tool that cannot be 

controlled with the switch is dangerous and must be 

repaired.

c) 

Disconnect the plug from the power source and/or 
the battery pack from the power tool before making 
any adjustments, changing accessories, or storing 
power tools.

 Such preventive safety measures reduce 

the risk of starting the power tool accidentally.

d) 

Store idle power tools out of the reach of children 
and do not allow persons unfamiliar with the power 
tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained 

users.

e) 

Maintain power tools. Check for misalignment or 
binding of moving parts, breakage of parts and any 

other condition that may afect the power tool's 

operation. If damaged, have the power tool repaired 
before use.

 Many accidents are caused by poorly 

maintained power tools.

f) 

Keep cutting tools sharp and clean.

 Properly 

maintained cutting tools with sharp cutting edges are 

less likely to bind and are easier to control.

g) 

Use the power tool, accessories and tool bits etc., 
in accordance with these instructions, taking into 
account the working conditions and the work to 
be performed.

 Use of the power tool for operations 

diferent from those intended could result in a hazardous 

situation.

5)  BATTERY TOOL USE AND CARE

a) 

Recharge only with the charger speciied by the 

manufacturer.

 A charger that is suitable for one type 

of battery pack may create a risk of ire when used with 

another battery pack.

b) 

Use power tools only with speciically designated 

battery packs.

 Use of any other battery packs may 

create a risk of injury and ire.

c) 

When battery pack is not in use, keep it away from 
other metal objects like paper clips, coins, keys, 
nails, screws, or other small metal objects that can 
make a connection from one terminal to another.

Shorting the battery terminals together may cause burns 

or a ire.

d) 

Under abusive conditions, liquid may be ejected 
from the battery; avoid contact. If contact 

accidentally occurs, lush with water. If liquid 

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation or 

burns.

6)  SERVICE

a) 

Have your power tool serviced by a qualiied repair 

person using only identical replacement parts.

This will ensure that the safety of the power tool is 

maintained.

SPECIFIC SAFETY INSTRUCTIONS FOR GRASS 
TRIMMERS

GENERAL

• 

Be familiar with the controls and the proper use of the 
tool

• 

The user is responsible for accidents or hazards 
occurring to other people or their property

• 

Only use the tool when the ambient temperature is 
between 0°C and 40°C

• 

Never mount metal cutting elements onto this tool

PERSONAL SAFETY

• 

This tool is not intended for use by persons (including 
children) with reduced physical, sensory or mental 
capabilities, or lack of experience and knowledge, 
unless they have been given supervision or instruction 
concerning use of the tool by a person responsible for 
their safety

• 

Ensure that children do not play with the tool

• 

Never allow children or people who are not familiar with 
the operating instructions to use the tool

• 

Keep hands and feet away from the cutting blade while 
trimming, especially when switching on the tool

• 

Always wear eye protection, long trousers and sturdy 
shoes when operating the tool

• 

Never operate the tool in the direct vicinity of persons; 
stop using the tool when persons (especially children) or 
pets are nearby

• 

Never operate the tool when you are tired, sick or under 

the inluence of alcohol or other drugs

BEFORE USE

• 

Always check that the supply voltage is the same as the 
voltage indicated on the nameplate of the charger

• 

Only use the tool in daylight or with appropriate artiicial 

lighting

• 

Check the functioning of the tool before each use and 
after any impact; in case of a defect, have it repaired 

immediately by a qualiied person (never open the tool 

yourself)

• 

Before use, thoroughly inspect the cutting area and 
remove any object that the tool may sling during cutting 

(such as stones, loose pieces of wood, etc.)

DURING USE

• 

Never operate the tool with a damaged cutting guard or 
without the cutting guard mounted

• 

The cutting blade continues to rotate for a short 

time after tool is switched of (do not touch rotating 

blade)

• 

Do not cut grass which is not on the ground (e.g. on 

walls or rocks)

• 

Do not cross roads or gravel paths with the tool still 
running

• 

Do not get distracted and always concentrate on what 
you are doing

• 

Always remove battery from tool

-

  whenever leaving the tool unattended

-

  before clearing jammed material

-

  before checking, cleaning or working on the tool

-

  after striking a foreign object

-

  whenever the tool starts vibrating abnormally

• 

Always ensure that the ventilation openings are kept 
clear of debris

AFTER USE

• 

Store the tool 

indoors

 in a dry and locked-up place, out 

of reach of children

CHARGING/BATTERIES

• 

Charge battery only with the charger that is supplied 
with the tool

• 

Do not touch the contacts in the charger

• 

Do not charge battery in damp or wet environments

• 

When charging the battery, place the charger on a lat 

non-lammable surface and away from combustible 

materials