Набор аккумуляторных инструментов SKIL F0150078AR - Инструкция по эксплуатации - Страница 157

5

Cordless hedge cutter 

0758

INTRODUCTION

• 

This tool has been designed for trimming hedges and 
bushes and is intended for domestic use only

• 

This tool is not intended for professional use

• 

Check whether the packaging contains all parts as 
illustrated in drawing 

②

• 

When parts are missing or damaged, please contact 
your dealer

• 

Read this instruction manual carefully before use 
and save it for future reference 

③

• 

Pay special attention to the safety instructions 
and warnings; failure to follow these may result in 
serious injury

TECHNICAL SPECIFICATIONS 

①

TOOL ELEMENTS 

②

A  

Protective guard

B  

Protective guard screw

C  

Charger

D  

Green charging light

E  

Battery

F  

Safety switch

G  

Trigger switch

H  

Cutting blades

J  

Blade tip protector

K  

Ventilation slots

L  

Storage rail (

screws not supplied

)

M  

Blade cover

N  

Storage hook

SAFETY

GENERAL SAFETY INSTRUCTIONS

WARNING! Read all safety warnings and all 

instructions.

 Failure to follow the warnings and instructions 

may result in electric shock, ire and/or serious injury. 

Save 

all warnings and instructions for future reference.

 The 

term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless) 

power tool. 

1)  WORK AREA SAFETY

a) 

Keep work area clean and well lit.

 Cluttered or dark 

areas invite accidents.

b) 

Do not operate power tools in explosive 

atmospheres, such as in the presence of lammable 

liquids, gases or dust.

 Power tools create sparks 

which may ignite the dust or fumes.

c) 

Keep children and bystanders away while operating 
a power tool.

 Distractions can cause you to lose 

control.

2)  ELECTRICAL SAFETY

a) 

Power tool plugs must match the outlet. Never 
modify the plug in any way. Do not use any adapter 
plugs with earthed (grounded) power tools.

Unmodiied plugs and matching outlets will reduce risk 

of electric shock.

b) 

Avoid body contact with earthed or grounded 
surfaces such as pipes, radiators, ranges and 
refrigerators. 

There is an increased risk of electric 

shock if your body is earthed or grounded.

c) 

Do not expose power tools to rain or wet 
conditions.

 Water entering a power tool will increase 

the risk of electric shock.

d) 

Do not abuse the cord. Never use the cord for 
carrying, pulling or unplugging the power tool. 
Keep cord away from heat, oil, sharp edges or 
moving parts.

 Damaged or entangled cords increase 

the risk of electric shock.

e) 

When operating a power tool outdoors, use an 
extension cord suitable for outdoor use.

 Use of a 

cord suitable for outdoor use reduces the risk of electric 

shock.

f) 

If operating a power tool in a damp location is 
unavoidable, use an earth leakage circuit breaker.

Use of an earth leakage circuit breaker reduces the risk 

of electric shock.

3)  PERSONAL SAFETY

a) 

Stay alert, watch what you are doing and use 
common sense when operating a power tool. Do 
not use a power tool while you are tired or under 

the inluence of drugs, alcohol or medication.

 A 

moment of inattention while operating power tools may 

result in serious personal injury.

b) 

Use personal protective equipment. Always wear 
eye protection.

 Protective equipment such as dust 

mask, non-skid safety shoes, hard hat, or hearing 
protection used for appropriate conditions will reduce 

personal injuries.

c) 

Prevent unintentional starting. Ensure the switch 

is in the of-position before connecting to power 

source and/or battery pack, picking up or carrying 
the tool.

 Carrying power tools with your inger on the 

switch or energising power tools that have the switch on 

invites accidents.

d) 

Remove any adjusting key or wrench before turning 
the power tool on.

 A wrench or a key left attached to 

a rotating part of the power tool may result in personal 

injury.

e) 

Do not overreach. Keep proper footing and balance 
at all times.

 This enables better control of the power 

tool in unexpected situations.

f) 

Dress properly. Do not wear loose clothing or 
jewelry. Keep your hair, clothing and gloves away 
from moving parts.

 Loose clothes, jewelry or long hair 

can be caught in moving parts.

g) 

If devices are provided for the connection of dust 
extraction and collection facilities, ensure these are 
connected and properly used.

 Use of dust collection 

can reduce dust-related hazards.

4)  POWER TOOL USE AND CARE

a) 

Do not force the power tool. Use the correct power 
tool for your application.

 The correct power tool will 

do the job better and safer at the rate for which it was 

designed.

b) 

Do not use the power tool if the switch does not 

turn it on and of.

 Any power tool that cannot be 

controlled with the switch is dangerous and must be 

repaired.