Триммеры Alpina B 1.0 EJ 223537 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

All and any operations performed in unauthorised
centres or by unqualified persons will totally invali
-
date the warranty.
8. STORAGE
After every work stint, clean the machine thor
-
oughly to remove all dust and debris, and repair
or replace any faulty parts.
The machine must be stored in a dry place away
from the elements and out of the reach of children.
– Fix the line cutting knife in a vice and sharpen
it using a flat file, being careful to retain the
original cutting angle.
– Refit the knife on the guard.
6. ELECTRIC CABLES
WARNING!
Check the condition of the
electric cables regularly and replace them if
they are worn or their insulation looks dam
aged.
If the appliance’s power supply wire is damaged,
it must be replaced by the manufacturer, service
agent or a similar qualified person.
7. EXTRAORDINARY MAINTENANCE
All maintenance operations not foreseen in this
manual must be performed exclusively by your
dealer.
MAINTENANCE AND STORAGE/ ACCESSORIES
27
EN
latter assumes responsibility for damages of
any kind due to such actions. When in doubt
or if lacking knowledge of the specificity of
each accessory, contact your retailer or spe
cialised gardening centre.
The table contains a list of all available accesso
-
ries, indicating those which may be used on each
machine, marked with the symbol “ ”.
WARNING!
In consideration that the
selection, application and usage of the ac ces
sory to be fitted in the variety of possible us
age are actions made solely by the user, the
9. ACCESSORIES
Code
Model B 1.0 EJ
118801752/0
118801751/0 (M10 x 1,25 sx F)
Содержание
- 141 ИДЕНТИФИKАЦИЯ ОСНОВНЫХ ЧАСТЕЙ
- 142 МЕРЫ ПРЕДОСТОРОЖНОСТИ ДЛЯ ОБЕСПЕЧЕНИЯ БЕЗОПАСНОСТИ
- 143 МЕРЫ ПРЕДОСТОРОЖНОСТИ ДЛЯ ОБЕСПЕЧЕНИЯ БЕЗОПАСНОСТИ
- 145 идет справа налево, поэтому ее надо отвинчивать; СБОРKА МАШИНЫ
- 146 ПОДГОТОВKА K РАБОТЕ; ПРИМЕЧАНИЕ; У головки-держателя нити; по часовой стрелке
- 147 ПОЛЬЗОВАНИЕ МАШИНОЙ
- 149 ТЕХОБСЛУЖИВАНИЕ И ХРАНЕНИЕ
- 150 ДОПОЛНИТЕЛЬНЫЕ ПРИСПОСОБЛЕНИЯ; Kод
- 151 Максимальные значения уровня шума и вибраций [1]; ТЕХНИЧЕСКИЕ ДАННЫЕ






