Beurer EM49 - Инструкция по эксплуатации - Страница 35

35

10. Cleaning and storage

Adhesive electrodes

•  To ensure that the adhesive electrodes remain adhesive for as 

long as possible, clean them carefully with a damp, lint-free cloth 

or clean the underside of the electrodes under lukewarm, running 

water and pat dry with a lint-free cloth.

Before cleaning with water, remove the connection cables 

from the electrodes.

•  Reapply the electrodes to the carrier foil following treatment.

Cleaning the device

•  Remove the batteries from the device before cleaning.

•   Clean the device after use with a soft, slightly damp cloth. If it 

is very dirty, you can also moisten the cloth with a mild soapy 

solution.

•  Do not use any chemical or abrasive cleaning agents.

 Ensure that no water enters the device.

Reuse of the device 

Once it has been properly prepared, the device can be used again. 

Preparation includes replacement of the treatment electrodes as 

well as cleaning of the surface of the device using a cloth moistened 

with a mild soapy solution.

Storage

•  Remove the batteries from the device if you will not be using it for 

a prolonged period of time. Leaking batteries may damage the 

device.

•  Do not make sharp bends in the connection cables and 

electrodes.

•  Disconnect the connection cables from the electrodes.

•  Reapply the electrodes to the carrier foil after use.

•  Store the device and accessories in a cool, well-ventilated space.

•  Never place any heavy objects on the device.

11. Disposal

The empty, completely flat batteries should be disposed of through 

specially designated collection boxes, recycling points or 

electronics retailers. You are legally required to dispose 

of the batteries.

Note: The codes below are printed on  

batteries containing harmful substances:    

Pb = Battery contains lead, Cd = Battery contains 

cadmium, Hg = Battery contains mercury.
For environmental reasons, do not dispose of the device in the 

household waste at the end of its useful life. Dispose of the unit at 

a suitable local collection or recycling point. Dispose of the device 

in accordance with EC Directive – WEEE (Waste Electrical and 

Electronic Equipment). If you have any questions, please contact the 

local authorities responsible for waste disposal.

12. Problems/solutions

The device does not switch when the ON/OFF button   is 

pressed. How to proceed: 

(1) Ensure batteries have been inserted correctly and are in contact 

with the terminals.

(2) Replace batteries, if applicable.

(3) Contact Customer Services.

Electrodes do not adhere to the body. How to proceed:

(1) Clean the adhesive surface of the electrodes using a damp, 

lint-free cloth. Replace the electrodes if they still do not adhere 

securely.

(2) Clean the skin prior to any application; do not use skincare 

lotions or oils prior to treatment. Shaving may increase the life of 

electrodes.

There is no noticeable stimulation. How to proceed:

(1) Press the ON/OFF button   to interrupt the program. Check 

the connection cables are correctly connected to the electrodes. 

Ensure the electrodes are in firm contact with the treatment area.

(2) Ensure the connection plug is firmly connected to the device.

(3) Press the ON/OFF button   to restart the program.

(4) Check electrode positions and ensure that adhesive electrodes 

do not overlap.

(5) Gradually increase the impulse intensity.

(6) The batteries are almost empty. Replace the batteries.