Beurer EM49 - Инструкция по эксплуатации - Страница 27

27

5.  Use

5.1 Notes on use

•  The device switches itself off automatically if it is not used for 

one minute (automatic switch-off). When the unit is switched on 

again, the LCD screen displays the menu selection and the most 

recently used menu flashes.

•  A brief acoustic signal is output when a valid button is pressed. 

Two brief acoustic signals are output when an invalid button is 

pressed.

•  You can pause the stimulation at any time by briefly pressing the 

ON/OFF button  . To continue the stimulation, briefly press the 

ON/OFF button   again and set the desired impulse intensity 

again.

5.2 Starting application

Step 1:

 Look for a suitable program from the program tables (see 

section „6. Program overview“).

Step 2:

 Place the electrodes on the desired area for treatment (for 

positioning suggestions see section „6.4 Information regarding the 

positioning of electrodes“) and connect them to the device.

Step 3:

 Press the ON/OFF button   to switch on the device.

Step 4:

 Press the 

MENU

 button to navigate through the 

 / 

 / 

 menus and press the 

ENTER

 button to confirm 

your selection.

Step 5:

 Use the 

˄/˅

 setting buttons to select the program number 

you want and press the 

ENTER

 button to confirm your selection. 

At the start of the stimulation treatment, the impulse intensity of 

 and 

 is set to 00 by default. No impulses are sent to the 

electrodes yet.

Step 6: 

Use the left and right 

˄/˅

 setting buttons for 

 and 

to select the impulse intensity you want. The indicator for impulse 

intensity in the display changes accordingly. If the program is in a 

pause phase, the intensity cannot be increased.

 General information

If you wish to return to the previous selection menu, press the 

MENU

 button. By holding down the 

ENTER

 button, you can skip 

individual setting steps and start directly with the stimulation 

treatment.

Keylock

Locks the buttons to avoid them being pressed

unintentionally.

1.  To activate the keylock, hold down the 

 button until the 

symbol is visible in the display (approx. 3 seconds).

2. To deactivate the keylock, hold down the 

 button until the 

symbol disappears from the display (approx. 3 seconds).

Pausing application

You can pause the stimulation at any time by briefly pressing the 

ON/OFF button  . To continue the stimulation, briefly press the 

ON/OFF button   again and set the desired impulse intensity 

again.