Beurer EM49 - Инструкция по эксплуатации - Страница 32

32

3.  Use the 

˄/˅

 setting buttons to select the impulse frequency you 

want and use the 

ENTER

 button to confirm. 

4.  Use the 

˄/˅

 setting buttons to select the impulse width you want 

and use the 

ENTER

 button to confirm.

5.Use the 

˄/˅

 setting buttons to select the treatment time you want 

and use the 

ENTER

 button to confirm.

6.Use the left and right 

˄/˅

 setting buttons for 

 and 

 to 

select the impulse intensity you want.

TENS 14 program

The TENS 14 program is a 

burst

 program that you can also 

customise. Various impulse sequences run in this program. Burst 

programs are suitable for all areas of application to be treated with 

changing signal patterns (to minimise the level of accustoming to 

the treatment). In this program you can set an impulse width of 
between 80 and 250 µs. 
1.  Place the electrodes on the desired area for treatment (for 

positioning suggestions see electrode positions in section 6.4) 

and connect them to the device.

2.  Select the TENS 14 program as described in section “5.2 Starting 

application” (step 3 to step 5). 

3.  Use the 

˄/˅

 setting buttons to select the impulse width you want 

and use the 

ENTER

 button to confirm.

4.Use the 

˄/˅

 setting buttons to select the treatment time you want 

and use the 

ENTER

 button to confirm.

5.Use the left and right 

˄/˅

 setting buttons for 

 and 

 to 

select the impulse intensity you want.

TENS 15 program

TENS 15 is a program that you can also customise. In this program, 

you can set the impulse frequency to between 1 and 150 Hz. 

The impulse width changes automatically during the stimulation 

treatment.

1.  Place the electrodes on the desired area for treatment (for 

positioning suggestions see electrode positions in section 6.4) 

and connect them to the device.

2.  Select the TENS 15 program as described in section “5.2 Starting 

application” (step 3 to step 5). 

3.  Use the 

˄/˅

 setting buttons to select the impulse frequency you 

want and use the 

ENTER

 button to confirm. 

4.Use the 

˄/˅

 setting buttons to select the treatment time you want 

and use the 

ENTER

 button to confirm.

5.Use the left and right 

˄/˅

 setting buttons for 

 and 

 to 

select the impulse intensity you want.

EMS 33 program

EMS 33 is a program that you can also customise. In this program, 

you can set the impulse frequency to between 1 and 150 Hz and the 

impulse width to between 80 and 320 µs.
1.  Place the electrodes on the desired area for treatment (for 

positioning suggestions see electrode positions in section 6.4) 

and connect them to the device.

2.  Select the EMS 33 program as described in section “5.2 Starting 

application” (step 3 to step 5). 

3.  Use the 

˄/˅

 setting buttons to select the impulse frequency you 

want and use the 

ENTER

 button to confirm. 

4.  Use the 

˄/˅

 setting buttons to select the impulse width you want 

and use the 

ENTER

 button to confirm.

5.Use the 

˄/˅

 setting buttons to select the treatment time you want 

and use the 

ENTER

 button to confirm.

6.Use the left and right 

˄/˅

 setting buttons for 

 and 

 to 

select the impulse intensity you want.

EMS 34 program

EMS 34 is a program that you can also customise. In this program, 

you can set the impulse frequency to between 1 and 150 Hz and 

the impulse width to between 80 and 450 μs. You can also set the