Bosch TES 50221 RW - Инструкция по эксплуатации - Страница 20

16

Robert Bosch Hausgeräte GmbH

16

en

N.B.:

 If the water filter is activated, the 

display will prompt you to remove the filter 

and then press the 

start

 button (10) again. 

Remove the filter now if you have not 

already done so.  

Press the 

start

 button (10).

Fill descaler

Press start

● Pour lukewarm water into the empty 

water tank (16) up to the 

0,5l

 mark and 

dissolve 2 Bosch descaling tablets in it. 

● Press the 

start

 button (10).

Calc‘n‘Clean in progress

The descaling pro gramme will now run for 

about 10 minutes.

Pl ace container

Pull milk frother

● Place a receptacle with a capacity of at 

least 1 litre under the outlet.

● Pull the milk frother (6) to open it.

Calc‘n‘Clean in progress

The descaling pro gramme will now run for 

about 12 minutes.

Clean / Fill water tank

Press start

● Rinse the water tank (16) and refill it with 

fresh water up to the 

max

 mark.

● Press the 

start

 button (10).

Calc‘n‘Clean in progress

The descaling pro gramme now runs for 

about 30 seconds and rinses the appliance.

Push milk frother

● Push the milk frother (6) in to close it.

Calc‘n‘Clean in progress

The cleaning pro gramme will now run for 

about 8 minutes.

Empt y drip tray

Insert drip tray

● Empty drip tray (8) and replace them.

Replace the filter if one is being used. The 

appliance has finished cleaning is ready for 

use again.

Important:

 Wipe down the appliance using 

a soft, damp cloth to immediately remove 

any descaler residue. Such residue can 

cause corrosion. New sponge cloths may 

contain salts. Salts can cause rust film 

on stainless steel and must therefore be 

washed out thoroughly before use

TES502_1RW.indb   16

21.02.2013   13:38:24