Bosch TES 50221 RW - Инструкция по эксплуатации - Страница 10

6

Robert Bosch Hausgeräte GmbH

6

en

14. Carefully pull out the milk frother (6) to 

open it. The appliance rinses out the 

milk frother (6) with water. The display 

shows 

Push milk  frother

.

15. Push the milk frother (6) in to close it. 

The appliance heats up and rinses. Some 

water will run out of the coffee outlet. 

When the drink selection menu is shown in 

the display, the appliance is ready for use.

Switching off the appliance

If the appliance has not been used for 

an hour, it rinses automatically and then 

switches off (time span can be programmed, 

see “Menu settings” 

Shut off 

on page 7). 

Exception:

 The appliance switches off 

without rinsing if only hot water or steam 

were dispensed.

To switch the appliance off manually before 

this, press the 

e

off /

j

 button (12). The 

appliance rinses and switches off.

N.B.: 

If the appliance is being used for the 

fi rst time, a service program has been run, 

or the appliance has not been operated 

for a long period, the fi rst beverage will 

not have the full aroma and should not be 

consumed.

When using the espresso machine for the 

fi rst time, you will achieve a suitably thick 

and stable “crema” only after the fi rst few 

cups have been dispensed.

After extended use, water droplets may 

form on the ventilation slots. This is normal.

 Water fi lter

A water fi lter can prevent scale buildup.

Before a new water fi lter is used, it must be 

rinsed. To do this, proceed as follows:

1.  Press the water fi lter fi rmly into the 

water tank with the aid of the measuring 

spoon (18). 

2.  Fill the water tank (16) with water up to 

the 

max

 mark.

3.  Press and hold the 

e

off /

j

 button (12) 

for at least three seconds. The menu 

opens.

4.  Press the 

e

off /

j

 button (12) 

 repeatedly until the display shows 

No / Old fi lter

.

5.  Select 

 Activate fi lter

 with the upper 

rotary knob (14).

6.  Press the 

start

 button (10). 

7.  Place a receptacle with a capacity of 

0.5 litres under the outlet.

8.  Press the 

start

 button (10). 

9.  Pull the milk frother (6) to open it.

10. Water will now fl ow through the fi lter to 

rinse it.

11. Push the milk frother (6) in to close it.

12. Empty the container. 

The appliance is ready to use once more.

Note: 

Rinsing the fi lter simultaneously acti-

vates the setting for the 

Change fi lter!

display.

The fi lter is no longer effective when the 

Change fi lter! 

display appears, or at 

the latest after 2 months. It needs to be 

replaced for reasons of hygiene and so that 

there is no build-up of limescale (this could 

damage the appliance).

Replacement fi lters can be obtained from 

retailers (TCZ7003) or from customer 

 service (467873). If no new fi lter is used, 

turn the 

fi lter

 setting to 

No / Old

.

TES502_1RW.indb   6

21.02.2013   13:38:17