Bosch TES 50221 RW - Инструкция по эксплуатации - Страница 15

11

TES502 | 02/2013

11

en

 Cleaning the milk system

If the milk system was not cleaned after 

milk has been dispensed, after a certain 

amount of time the message 

Rinse milk 

system!

 will appear on the display.

Clean the milk system immediately after use! 

To pre-clean the milk system automatically:

1.  Select 

f

  by turning the rotary knob (14).

2.  Place a receptacle under the milk 

frother (6).

3.  Press the 

start

 button (10).

4.  Pull the milk frother (6) to open it. The 

appliance now automatically fi lls the 

receptacle with water. The rinse pro-

cedure stops automatically after about 

1 minute.

5.  Push the milk frother (6) in to close it.

6.  Let the milk frother (6) cool down.

7.  Empty the receptacle and wipe dry the 

outside of the milk frother (6).

In addition to this, clean the milk system 

thoroughly at regular intervals (by hand or 

in the dishwasher).

Dismantling the milk system for cleaning:

1.  To remove, take hold of the metal sleeve 

and pull it downwards and off.

2.  Twist the steam nozzle (6d) anticlock-

wise and remove it.

1

2

6d

3.  Remove the frothing tube (6c).

6c

4.  Clean the individual parts with a 

detergent solution and a soft brush. If 

necessary, soak in a warm detergent 

solution. Clean the air hole (6e) 

thoroughly.

6e

5.  Rinse all parts with clean water and dry.

6.  Fit the steam nozzle (6d) and frothing 

tube (6c) back into the metal sleeve.

1

2

6d

6c

7.  Twist the steam nozzle clockwise until 

the marks are aligned.

TES502_1RW.indb   11

21.02.2013   13:38:21