JVC GZ-HM970 - Инструкция по эксплуатации - Страница 30

Troubleshooting

If you encounter problems with this unit, check the following before requesting service.

1 Refer to “Trouble” below.
2 Refer to the “Troubleshooting” section in the “Detailed User Guide”.

If you have difficulties operating the unit, refer to the detailed descriptions in the “Detailed

User Guide”.

0

http://manual.jvc.co.jp/index.html/

3 Refer to the FAQ of new products on JVC’s website.

0

http://www.jvc.com/

4 This unit is a microcomputer-controlled device. Electrostatic discharge, external noise

and interference (from a TV, a radio, etc.) might prevent it from functioning properly.

In such a case, reset the unit.

A

Turn off the power. (Close the LCD monitor.)

B

Remove the AC adapter and battery pack from this unit, reattach them, open

the LCD monitor and this unit powers on automatically.

5 If the above do not solve the problem, consult your nearest JVC dealer or JVC

service center.

Trouble

Trouble

Action

Page

Power

POWER/CHARGE lamp

starts blinking when the

monitor is closed.

0

The battery pack is being charged.

10

Recording

Recording cannot be

performed.

0

Check the 

A

 / 

B

 button.

15

0

Set to the recording mode by tapping

the 

q

 button.

18

Recording stops

automatically.

0

Turn off this unit, wait for a while, and

turn it on again. (This unit stops

automatically to protect the circuit when

the temperature rises.)

-

0

Recording stops automatically after 12

hours of continuous recording.

-

Playback

Sound or video is

interrupted.

0

Sometimes playback is interrupted at

the connecting section between two

scenes. This is not a malfunction.

-

3D images cannot be

seen on a 3D

compatible TV properly.

0

Set “HDMI OUTPUT” in the “COMMON”

menu accordingly.

-

30

For more information, refer to the Detailed User Guide

http://manual.jvc.co.jp/index.html/