CANDY CID30 - Инструкция по эксплуатации - Страница 20

EN-19

Under any circumstances, make sure the Induction cooker hob is well 
ventilated and the air inlet and outlet are not blocked. Ensure the Induction 
cooker hob is in good work state. As shown below 

Note: The safety distance between the hotplate and the cupboard 
above the hotplate should be at least 760mm. 

A (mm) 

B (mm)  C (mm)  D 

E 

760  

50 mini  30 mini   Air intake  Air exit   10 

Before you install the hob, make sure that

•

the work surface is square and level, and no structural members interfere 
with space requirements 

•

the work surface is made of a heat-resistant material 

•

if the hob is installed above an oven, the oven has a built-in cooling fan 

•

the installation will comply with all clearance requirements and 
applicable standards and regulations 

•

a suitable isolating switch providing full disconnection from the mains 
power supply is incorporated in the permanent wiring, mounted and 
positioned to comply with the local wiring rules and regulations 
The isolating switch must be of an approved type and provide a 3 mm 

air gap contact separation in all poles (or in all active [phase] conductors 

if the local wiring rules allow for this variation of the requirements).