Yamaha RX-V463 - Инструкция по эксплуатации - Страница 60

58

 En

SET MENU

Surround left/right speakers

  SUR. L/R SP

Choices: NONE, 

SML

, LRG

When the surround speakers are large

Select “LRG” (large).

When the surround speakers are small

Select “SML” (small).

When you do not use the surround speakers

Select “NONE” (none). This unit is set to the Virtual 
CINEMA DSP mode (see page 39).

LFE Bass out

  LFE/BASS OUT

Use this feature to select the speakers that output the LFE 
(low-frequency effect) and the low-frequency signals.
Choices: SWFR, FRNT, 

BOTH

When a subwoofer is connected to this unit 
and you want to get natural bass sound

Select “SWFR” (subwoofer). The LFE signals as well 
as the low-frequency signals of other speakers set to 
“SML” (or “SMALL”) are directed to the subwoofer.

When a subwoofer is connected to this unit 
and you want to get rich bass sound

Select “BOTH” (both). The low-frequency signals of 
any source are output from the subwoofer. The LFE 
signals as well as the low-frequency signals of other 
speakers set to “SML” (or “SMALL”) are directed to 
the subwoofer. The low-frequency signals of the front 
left and right channels are directed to the front left and 
right speakers and the subwoofer regardless of the 
“FRONT SP” setting (see page 57).

When you do not use a subwoofer

Select “FRNT” (front). The LFE signals, the low-
frequency signals of the front left and right channels, 
and the low-frequency signals of other speakers set to 
“SML” (or “SMALL”) are all directed to the front left 
and right speakers regardless of the “FRONT SP” 
setting (see page 57).

Crossover

  CROSS OVER

Use this feature to select a crossover frequency of all the 
speakers set to “SML” (or “SMALL”) in “SPEAKER 
SET” (see pages 57). All frequencies below the selected 
frequency will be sent to the subwoofer or front speakers 
depending on the setting of  “LFE/BASS OUT” in 
“SPEAKER SET” (see pages 57).
Choices: 40Hz, 60Hz, 

80Hz

, 90Hz, 100Hz, 110Hz,

120Hz, 160Hz,

200Hz

Subwoofer phase

  SUBWOOFER PHASE

Use this feature to switch the phase of your subwoofer if 
bass sounds are lacking or unclear.
Choices: 

NORMAL

, REVERSE

•

Select “NORMAL” if you do not want to reverse the 
phase of your subwoofer.

•

Select “REVERSE” to reverse the phase of your 
subwoofer.

1 SOUND MENU

A)SPEAKER SET

SUR. L/R SP

NONE >SML

LRG

1 SOUND MENU

A)SPEAKER SET

LFE/BASS OUT

SWFR FRNT>BOTH

1 SOUND MENU

A)SPEAKER SET

CROSSOVER

FREQ

;;;

80Hz

1 SOUND MENU

A)SPEAKER SET

SUBWOOFER PHASE

>NORMAL

REVERSE