Yamaha RX-V463 - Инструкция по эксплуатации - Страница 55

USING BLUETOOTH™ COMPONENTS

53

 En

English

BA
S

IC

OPERA

T

ION

You can connect a Yamaha Bluetooth adapter (such as YBA-10, sold separately) to the DOCK terminal of this unit and 
enjoy the music contents stored in your Bluetooth component (such as a portable music player) without wiring between 
this unit and the Bluetooth component. You need to perform “pairing” the connected Bluetooth adapter and your 
Bluetooth component in advance.

Pairing must be performed when using a Bluetooth 
component with the Bluetooth adapter connected to this 
unit for the first time or if the pairing data has been 
deleted. “Pairing” refers to the operation of registering a 
Bluetooth component for Bluetooth communications. 

y

• You only need the pairing operation for the first time that you 

use the Bluetooth component with the Bluetooth adapter. 

• Pairing requires operations on this unit and on the other 

component with which Bluetooth communications are to be 
established. If necessary, refer to the other component’s 
operating instructions.

There are two pairing methods: pairing by using “START 
PAIRING” in “SET MENU” and quick pairing.

■

Pairing by using “SET MENU”

Use this feature to perform pairing with the video monitor. 
Select “START PAIRING” in “INPUT MENU”. See 
page 62 for details.

■

Quick pairing

1

Press 

O

INPUT 

l

 / 

h

 repeatedly (or press 

3

V-AUX/DOCK

) to select “V-AUX” as the 

input source.

2

Turn on the Bluetooth component you want 
to pair with.

3

Press and hold 

C

BAND

 (or 

6

BAND

) for 3 

seconds. 

Once the Bluetooth adapter starts pairing, 
“Searching...” appears for a moment. While the 
Bluetooth adapter is in the pairing mode, DOCK 
indicator flashes in the front panel display.

y

To cancel the pairing, press 

C

BAND

 (or 

6

BAND

) again.

If the Bluetooth adapter is not connected to the DOCK 
terminal of this unit, “No BT adapter” appears in the front 
panel display.

4

Check that the Bluetooth component detects 
the Bluetooth adapter.

If the Bluetooth component detects the Bluetooth 
adapter, “YBA-10 YAMAHA” (example) appears in 
the Bluetooth device list.

5

Select the Bluetooth adapter in the Bluetooth 
device list and then enter the pass key 
“0000” on the Bluetooth component. 

When the pairing procedure is successful, 
“Completed” appears in the front panel display.

The Yamaha Bluetooth adapter can be paired with up to eight 
Bluetooth components. When pairing is conducted successfully 
with a ninth component and the pairing data is registered, the 
pairing data for the least recently used other component is 
cleared.

1

Press 

O

INPUT 

l

 / 

h

 repeatedly (or press 

3

V-AUX/DOCK

) to select “V-AUX” as the 

input source.

2

Start playback of your Bluetooth component.

When the connected Bluetooth adapter detects the 
Bluetooth component, “BT connected” and the 
DOCK indicator appears in the front panel display.

y

• When you press 

7

ENTER

, the connected Bluetooth adapter 

searches and connect to the last connected Bluetooth 
component. If the Bluetooth adapter cannot find the Bluetooth 
component, “Not found” appears in the front panel display.

• To disconnect the Bluetooth adapter from the Bluetooth 

component, press 

8

RETURN

.

Using Bluetooth™ components

Pairing the Bluetooth™ adapter 
and your Bluetooth™ component

To ensure security, a time limit of 8 minutes is set for the 
pairing operation. You are recommended to read and fully 
understand all the instructions before starting.

Note

Note

Playback of the Bluetooth™ 
component