Yamaha RX-V365 - Инструкция по эксплуатации - Страница 37

33

 En

Set menu

English

INTR

ODUCTION

AD

DITIONAL 

INFORMA

T

ION

APPENDIX

PRE

P

ARA

T

ION

BA

S

IC

OPERA

T

ION

AD

V

ANCED

OPERA

T

ION

LFE signals output

Low-frequency signals output

Notes

*1 Outputs the low-frequency signals of the front channels and other 

speakers to “SML” or “NONE.”

*2 Always output the low-frequency signals of the front channels.
*3 Output the low-frequency signals if the sizes of speakers are set to 

“LARGE” (or “LRG”).

*4 Output the low-frequency signals of the speakers set to “SML.” 

■

Crossover

CROSSOVER

Use this feature to select a crossover frequency of all the 
speakers set to “SML” (or “SMALL”) or to “NONE” in 
“SPEAKER SET” (see pages 31 and 32).
Choices: 40Hz, 60Hz, 80Hz*, 90Hz, 100Hz, 110Hz, 

120Hz, 160Hz, 200Hz

Note

•

All frequencies below the selected frequency will be sent to the 
subwoofer or to the speakers set to “LRG” (or “LARGE”) in “SPEAKER 
SET” (see pages 31 and 32).

■

Subwoofer phase

SWFR PHASE

Use this feature to switch the phase of your subwoofer if 
bass sounds are lacking or unclear.

Use this feature to manually adjust the output level of each 
speaker.
Control range: –10 dB to 0 dB* to +10 dB
Control step: 1 dB

Notes

•

The available speaker channels differ depending on the setting of the 
speakers.

•

This does not affect recorded material.

Use this feature to manually adjust the distance of each 
speaker and the delay applied to the respective channel. 
All sounds would be adjusted to arrive at the listening 
position at the same time regardless of distance from each 
speaker.

■

Unit

UNIT

■

Speaker distances

Control range: 0.30 to 24.00 m (1.0 to 80.0 ft)
Control step: 0.10 m (0.5 ft)
Initial setting: 

FRONT L/FRONT R/SWFR: 3.00 m (10.0 ft)
CENTER: 2.60 m (8.5 ft)
SUR. L/SUR. R: 2.40 m (8.0 ft)

Note

•

The available speaker channels differ depending on the setting of the 
speakers.

Use this feature to adjust the built-in 5-frequency band 
(100Hz, 300Hz, 1kHz, 3kHz and 10kHz) graphic 
equalizer for the center channel so that the tonal quality of 
the center speaker matches that of the front speakers.
Control range: –6.0 dB to 0 dB* to +6.0 dB
Control step: 0.5 dB

y

•

Press 

o

k

 / 

n

 to select a frequency band and 

o

l

 / 

h

 to adjust the 

selected frequency band.

•

You can make adjustment while listening to the currently source or a test 
tone.

Following is an example where “100Hz” is selected as the 
frequency band.

Choice

Subwoofer

Front speakers

Other speakers

BOTH

*

Output

No output

No output

SWFR

Output

No output

No output

FRONT

No output

Output

No output

Choice

Subwoofer

Front speakers

Other speakers

BOTH

*

*1

*2

*3

SWFR

*4

*3

*3

FRONT

No output

*1

*3

Choice

Function

NRM

*

Does not reverse the phase of your subwoofer.

REV

Sets the phase of your subwoofer to reverse.

Speaker level

B)SP LEVEL

SP LEVEL

Adjusted speaker

FL

Front left speaker

FR

Front right speaker

C

Center speaker

SL

Surround left speaker

SR

Surround right speaker

SWFR

Subwoofer

Speaker distance

C)SP DISTANCE

Choice

Condition

meters

* When you adjust speaker distances in meters.

feet

When you adjust speaker distances in feet.

SP DISTANCE

Adjusted speaker

FRONT L

Front left speaker

FRONT R

Front right speaker

CENTER

Center speaker

SUR. L

Surround left speaker

SUR. R

Surround right speaker

SWFR

Subwoofer

Center graphic equalizer

D)CENTER GEQ

1 0 0 H z - - | | - -     0