Dreame W10 - Инструкция по эксплуатации - Страница 10

16

17

EN

EN

Dust Bin 

Routine Maintenance

1. Open the robot cover and press the dust bin clip to remove the dust bin.

2. Open the bin cover and empty the bin as shown in the diagram.

* Clean it as needed

Note: 

 The cleaning tool can be used to empty the dust bin.

Filter

1. Remove the filter and tap its basket gently.

Note: 

Do not attempt to clean the filter with a brush, finger, or sharp object.

2. If necessary, rinse the dust bin under the running water and dry them 

completely before re-installing.

Note:

· Rinse the dust bin and filter with clean water only. Do not use any detergent.

· Use the dust bin and filter only when whey are completely dry.

* Clean it once every 2 weeks (fully dry after cleaning) and change it every 3 months

Fresh Tank

* Clean the filter media once every 3 months

1. Open the fresh tank cover, move the hose to the side to remove and clean 

the filter media as shown in the diagram.

2. Put the filter meida and hose back.

Waste Tank

1. Take out the waste tank, open the waste tank cover, and then dump the 

wastewater.

2. Clean the waste tank with water and put it back to the base.

Note: 

The floating ball in the waste tank is a moving part. Do not clean the floating 

ball excessively in case of affecting its functions.

* Clean after each use

Routine Maintenance