Bosch MUM 50136 - Инструкция по эксплуатации - Страница 23

23

en

Cleaning and servicing

W

Risk of scalding!

If processing hot liquids, steam escapes 

through the funnel in the lid. Add a 

max. 0,5 litres of hot or frothing liquid.

Warning!

Blender may be damaged. Do not process 

deep­frozen ingredients (except ice cubes). 

Do not operate blender when empty.

Working with the blender

Fig. 

J

:

■ Press the release button and 

move the swivel arm to 

position 

4

.

■ Remove the blender drive cover.

■ Attach blender jug (mark on the handle 

on mark on the base unit) and turn all the 

way in an anti­clockwise direction.

■ Add ingredients. 

Maximum amount of liquid = 1.25 litres; 

maximum amount of frothing or hot 

liquids = 0.5 litres; 

Optimal processing capacity –  

solids = 50­100 g;

■ Attach the cover and turn anti­clockwise 

all the way into the blender handle. The 

cover must be locked in position.

■ Set the rotary switch to the desired 

setting.

Adding more ingredients
Fig. 

J

-8:

■ Switch off the appliance with the rotary 

switch.

■ Remove the lid and add ingredients

or

■ remove the funnel and gradually add solid 

ingredients through the refill opening

or

■ pour liquid ingredients through the funnel.

After using the appliance

■ Switch off the appliance with the rotary 

switch.

■ Rotate the blender in a clockwise 

direction and remove.

Tip:

 It is recommended to clean the blender 

immediately after use.

Cleaning and servicing

Attention!

Do not use abrasive cleaning agents. 

Surfaces may be damaged.

Cleaning the base unit

W

Danger of electric shock!

Never immerse the base unit in water or 

place under running water. Do not use a 

steam cleaner.

■ Remove mains plug.

■ Wipe the base unit and drive cover with 

a damp cloth. If required, use a little 

detergent.

■ Then dry the base unit.

Cleaning the bowl and tools

The bowl and tools are dishwasher­proof. 

Do not wedge plastic parts in the dish­

washer, as they could be permanently 

deformed during the washing process!

Cleaning the continuous-feed 

shredder

All parts of the continuous­feed shredder 

are dishwasher­proof.

Tip:

 To remove the red film after processing 

e.g. carrots, pour a little cooking oil on a 

cloth and rub the film off the continuous­

feed shredder (not the cutting discs). Then 

rinse the continuous­feed shredder.

Cleaning the blender

W

Risk of injury from sharp blades!

Do not touch blender blades with bare hands.

The blender jug, lid and funnel are 

dishwasher­proof.

Tip: 

After processing liquids, it is often 

sufficient to clean the blender without 

removing it from the appliance. Pour a 

little water and washing­up liquid into the 

attached blender. Switch on the blender for 

several seconds (setting 

M

). Pour out the 

water and rinse out the blender with clear 

water.

Important information

If required, clean accessories bag. Follow 

care instructions in the bag.