Bosch GLL 2-10 G - Инструкция по эксплуатации - Страница 17

English | 

17

Working with the Laser Target Plate

The laser target plate 

(20)

 improves visibility of the laser

beam in unfavourable conditions and at greater distances.
The reflective surface of the laser target plate 

(20)

 improves

visibility of the laser line. The transparent surface enables
the laser line to be seen from behind the laser target plate.

Working with the Tripod (Accessory)

A tripod offers a stable, height-adjustable support surface
for measuring. Place the measuring tool with the 1/4" tripod
mount 

(5)

 on the thread of the tripod 

(23)

 or a conventional

camera tripod. Use the 5/8" tripod mount 

(4)

 to secure the

measuring tool on a conventional building tripod. Tighten the
measuring tool using the locking screw of the tripod.
Roughly align the tripod before switching on the measuring
tool.

Securing with the universal holder (accessory)
(see figure F)

Using the universal holder 

(19)

, you can secure the measur-

ing tool on vertical surfaces, pipes or magnetizable materi-
als, for example. The universal holder is also suitable for use
as a floor stand and facilitates height adjustment of the
measuring tool.
Roughly align the universal holder 

(19)

 before switching on

the measuring tool.

Laser Goggles (Accessory)

The laser goggles filter out ambient light. This makes the
light of the laser appear brighter to the eye.

u

Do not use the laser goggles as protective goggles.

The laser goggles make the laser beam easier to see; they
do not protect you against laser radiation.

u

Do not use the laser goggles as sunglasses or while
driving. 

The laser goggles do not provide full UV protec-

tion and impair your ability to see colours.

Example applications (see figures F–H)

Examples of possible applications for the measuring tool can
be found on the graphics pages.
Always place the measuring tool close to the surface or edge
that needs to be checked, and allow it to level in before the
beginning of any measurement.
Always measure the distances between the laser beam and a
surface or edge at two points that are as far from each other
as possible.

Maintenance and Service

Maintenance and Cleaning

Keep the measuring tool clean at all times.
Never immerse the measuring tool in water or other liquids.
Wipe off any dirt using a damp, soft cloth. Do not use any de-
tergents or solvents.
The areas around the outlet aperture of the laser in particular
should be cleaned on a regular basis. Make sure to check for
lint when doing this.

Only store and transport the measuring tool in the protective
pouch 

(21)

.

If the measuring tool needs to be repaired, send it off in the
protective pouch 

(21)

.

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: 

www.bosch-pt.com

The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd.
Power Tools 
Locked Bag 66 
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ: 
Phone: +61 3 95415555 
www.bosch-pt.com.au
www.bosch-pt.co.nz

Great Britain

Robert Bosch Ltd. (B.S.C.) 
P.O. Box 98 
Broadwater Park 
North Orbital Road 
Denham Uxbridge
UB 9 5HJ 
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair. 
Tel. Service: (0344) 7360109 
E-Mail: boschservicecentre@bosch.com

Ireland

Origo Ltd. 
Unit 23 Magna Drive 
Magna Business Park 
City West 
Dublin 24 
Tel. Service: (01) 4666700 
Fax: (01) 4666888

Republic of South Africa
Customer service

Hotline: (011) 6519600

Gauteng – BSC Service Centre

35 Roper Street, New Centre 

Bosch Power Tools

1 609 92A 5TD | (01.07.2020)