Fulgor Milano FCO 4512 TM X - Инструкция по эксплуатации - Страница 58

EN

18

10 - System Setting

With the oven on, select the icon   and confirm with the key   
to enter the SETTINGS menu. This menu permits setting a number of 
parameters or special functions. It also permits accessing the error 
events list.

1.  Press the keys     to select the sub menu and confirm with the 

key.

SETUP

SERVICE

2.  Use this menu to change the following settings:
  Press the keys     to select the item to be set or to be displayed 

from among the three available ones and confirm with the   key.

EVENT LOGS

MAIN VOLTAGE

SYSTEM

DEMO

OM 15

Event Log

The menu permits checking any recorded errors. These codes can be 
notified to the after-sales service.

01  12/11/2015  07:06  CODE: F10305

EVENT LOGS

02  17/11/2015  13:17  CODE: F10305

Demo

The purpose of this function is to set the DEMO mode, which makes the 
oven useless for cooking but automatically performs a demonstration 
of functions. 

1.  Press the keys     to select the item ON.
2.  Confirm with the   key.
3.  Press the   key.

After about 30 seconds, the oven starts to operate in this mode.
To temporarily stop the DEMO function, simply keep any key pressed 
for a few seconds until the oven switches to standby. To start it again, 
press the   key.
To disable the function, enter the DEMO display page and set OFF. 
Confirm using the   key.

NOTE  Once set, the function remains enabled even if the oven is 

disconnected from the power mains.

DEMO

ON