Philips HR1659 - Инструкция по эксплуатации - Страница 9

Caution: Do not process more than 1 batch without interruption. Let the appliance cool down 

for 5 minutes before you continue processing.

Note: Cut large ingredients into cubes of approx. 2cm before you process them.

 1 

 Put the blade unit in the chopper bowl (Fig. 5).

 2 

 Put the ingredients in the chopper bowl.

See the table for the recommended quantities and processing times.

Compact chopper quantities and processing times 

Ingredients

Chopping quantity

Time

Speed

Onions

100g

5 x 1sec.

5

Eggs

2

5 x 1sec.

5

Meat

120g (max.)

5sec.

turbo

Herbs

20g

5 x 1sec.

10-15

Nuts and almonds

100g

20sec.

turbo

Garlic

50g

5 x 1sec.

turbo

Parmesan cheese

50-100g (max.)

15sec.

turbo

 3 

 Put the chopper lid on the chopper bowl (Fig. 6).

 4 

 Fasten the motor unit onto the chopper lid (‘click’) (Fig. 7).

 5 

 Put the plug in the wall socket.

 6 

 Press and hold the on/off button or the turbo speed button to let the appliance operate. 

 - When you use the on/off button, you can adjust the speed with the speed ring. The higher the 

speed, the shor ter the processing time required.

 - The speed ring has settings from 1 (low speed) to 20 (high speed).

 - When you use the turbo speed button, the appliance operates at maximum speed. In this case, 

you cannot adjust the speed with the speed ring.

Note: If the ingredients stick to the wall of the chopper bowl, unplug the appliance and loosen dry 

ingredients from the wall with a spatula or by adding some liquid (e.g. if you are making pesto).

Food processor
kneading accessory

The kneading accessor y is intended for kneading pasta dough and cake mixture. 

 1 

 Place the kneading accessory in the food processor bowl.  (Fig. 8)

 2 

 Put the ingredients in the bowl.

See the table below for recommended quantities and processing time. 

Tip: For the best results, first put the liquid ingredients in the bowl and then add the dry ingredients.

EnglisH

9