Philips HR1659 - Инструкция по эксплуатации - Страница 12

 6 

 Press and hold the turbo button to switch on the appliance.  (Fig. 24)

When you use the turbo speed button, the appliance operates at maximum speed. In this case, you 

cannot adjust the speed with the speed ring.

 7 

 Press the pusher lightly onto the ingredients in the feeding tube. 

Note: If ingredients get stuck, unplug the appliance, detach the motor unit, open the lid by turning it 

clockwise and remove the ingredients that are stuck in the feeding tube. 

 8 

 After processing, press the release button on the motor unit (1) and remove the motor unit 

from the food processor lid (2).  (Fig. 12)

Always let the appliance cool down for 30 minutes after processing.

 9 

  Turn the lid clockwise (1) and remove it from the bowl (2) (Fig. 25).

 10 

 Remove the cube cutter blade. Then use the special pusher supplied to push the ingredients 

that are stuck in the grid into the bowl.  (Fig. 26)

 11 

 Detach the cube cutter by turning it clockwise (1) and remove it from the bowl (2). Then 

empty the bowl.  (Fig. 27)

Cleaning (Fig. 28)

Do not immerse the motor unit, the chopper lid and the food processor lid in water, nor rinse 

them under the tap. Use a moist cloth to clean them (Fig. 29).
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone 

to clean the appliance.
Clean the blade units, the cube cutter and the double-sided shredding/slicing disc very carefully. 

Their cutting edges are very sharp.

 1 

 Unplug the appliance. 

 2 

 Press the release button on the motor unit to remove the accessory you have used.

 3 

 Disassemble the accessory.

Tip: You can also remove the rubber ring from the chopper bowl for extra thorough cleaning.

 4 

 See the cleaning table for further instructions.

If you clean the blender bar in the sink, always detach the motor unit before cleaning. 
Tip: For quick cleaning of the blender bar, pour warm water with some washing-up liquid into the beaker, 

insert the blender bar and let the appliance operate for approx. 10 seconds.
Tip: For easy cleaning of the cube cutter, push any remaining ingredients out of it with the pusher 

supplied. 

Ordering accessories

If you need to replace an accessor y or want to purchase an additional accessor y, go to your Philips 

dealer or visit www.philips.com/shop. If you have problems obtaining accessories, please contact the 

Philips Consumer Care Centre in your countr y.

EnglisH

12