Candy CDI 30 - Инструкция по эксплуатации - Страница 18

EN-17

Pans do not become 
hot and   appears in 
the display. 

The induction hob cannot 
detect the pan because it is 
not suitable for induction 
cooking. 

The induction hob cannot 
detect the pan because it is 
too small for the cooking zone 
or not properly centred on it. 

Use cookware suitable for induction 
cooking. See section „Choosing the 
right cookware”. 
 

Centre the pan and make sure that 
its base matches the size of the 
cooking zone. 

The induction hob or 
a cooking zone has 
turned itself off 
unexpectedly, a tone 
sounds and an error 
code is displayed 
(typically alternating 
with one or two digits 
in the cooking timer 
display). 

Technical fault. 

Please note down the error letters 
and numbers, switch the power to 
the induction hob off at the wall, 
and contact a qualified technician. 

Never attempt to disassemble the unit by yourself. 

Failure Display and Inspection  

If an abnormality comes up, the induction hob will enter the protective state 
automatically and display corresponding protective codes: 

Problem 

Possible causes 

What to do 

F3-F8 

Temperature sensor failure 

Please contact the supplier. 

F9-FE 

Temperature sensor of the 
IGBT failure. 

Please contact the supplier. 

E1/E2 

Abnormal supply voltage 

Please inspect whether 
power supply is normal. 
Power on after the power 
supply is normal. 

E3/E4 

Abnormal temperature 

Please inspect the pot. 

E5/E6 

Bad induction hob heat 
radiation 

Please restart after the 
induction hob cools down. 

The above are the judgment and inspection of common failures. 
Please do not disassemble the unit by yourself to avoid any danger and 
damages to the induction hob.