Candy CDI 30 - Инструкция по эксплуатации - Страница 16

EN-15

Care and Cleaning  

The settings below are guidelines only. The exact setting will depend on 
several factors, including your cookware and the amount you are cooking. 
Experiment with the hob to find the settings that best suit you. 

What?

How?

Important!

Everyday soiling on 
glass (fingerprints, 
marks, stains left by 
food or non-sugary 
spillovers on the 
glass) 

1.

Switch the power to the hob 
off. 

2.

Apply a cooktop cleaner 
while the glass is still warm 
(but not hot!) 

3.

Rinse and wipe dry with a 
clean cloth or paper towel. 

4.

Switch the power to the 
cooktop back on. 

•

When the power to the hob is 
switched off, there will be no “hot 
surface” indication but the cooking 
zone may still be hot! Take extreme 
care. 

•

Heavy-duty scourers, some nylon 
scourers and harsh/abrasive 
cleaning agents may scratch the 
glass. Always read the label to check 
if your cleaner or scourer is suitable. 

•

Never leave cleaning residue on the 
cooktop: the glass may become 
stained. 

Boilovers, melts, 
and hot sugary spills 
on the glass 

Remove these immediately 
with a fish slice, palette knife 
or razor blade scraper suitable 
for Induction glass cooktops, 
but beware of hot cooking zone 
surfaces: 

1.

Switch the power to the 
cooktop off at the wall. 

2.

Hold the blade or utensil at a 
30° angle and scrape the 
soiling or spill to a cool area 
of the cooktop. 

3.

Clean the soiling or spill up 
with a dish cloth or paper 
towel. 

4.

Follow steps 2 to 4 for 

“Everyday soiling on glass” 
above. 

•

Remove stains left by melts and 
sugary food or spillovers as soon as 
possible. If left to cool on the glass, 
they may be difficult to remove or 
even permanently damage the glass 
surface. 

•

Cut hazard: when the safety cover is 
retracted, the blade in a scraper is 
razor-sharp. Use with extreme care 
and always store safely and out of 
reach of children. 

Spillovers on the 
touch controls 

1.

hob the power to the 
cooktop off. 

2.

Soak up the spill 

3.

Wipe the touch control area 
with a clean damp sponge or 
cloth. 

4.

Wipe the area completely 
dry with a paper towel. 

5.

Switch the power to the 
cooktop back on. 

•

The hob may beep and turn itself 
off, and the touch controls may not 
function while there is liquid on 
them. Make sure you wipe the touch 
control area dry before turning the 
hob back on.