Candy CDI 30 - Инструкция по эксплуатации - Страница 17

EN-16

Hints and Tips  

Problem

Possible causes

What to do

The induction hob 
cannot be turned 
on. 

No power. 

Make sure the induction hob is 
connected to the power supply 
and that it is switched on. 
Check whether there is a power 
outage in your home or area. If 
you've checked everything and 
the problem persists, call a 
qualified technician. 

The touch controls 
are unresponsive. 

The controls are locked. 

Unlock the controls. See section 

“Using your induction cooktop” 

for instructions. 

The touch controls 
are difficult to 
operate. 

There may be a slight film of 
water over the controls or 
you may be using the tip of 
your finger when touching 
the controls. 

Make sure the touch control area 
is dry and use the ball of your 
finger when touching the 
controls. 

The glass is being 
scratched. 

Rough-edged cookware. 

 
 
 
Unsuitable, abrasive scourer 

or cleaning products being 

used. 

Use cookware with flat and 

smooth bases. See “Choosing the 
right cookware”. 
 
See “Care and cleaning”. 

Some pans make 
crackling or clicking 
noises. 

This may be caused by the 
construction of your 
cookware (layers of different 
metals vibrating differently). 

This is normal for cookware and 
does not indicate a fault. 

The induction hob 
makes a low 
humming noise 
when used on a 
high heat setting. 

This is caused by the 
technology of induction 
cooking. 

This is normal, but the noise 
should quieten down or disappear 
completely when you decrease 
the heat setting. 

Fan noise coming 
from the induction 
hob. 

A cooling fan built into your 
induction hob has come on to 
prevent the electronics from 
overheating. It may continue 
to run even after you've 
turned the induction hob off. 

This is normal and needs no action. 
Do not switch the power to the 
induction hob off at the wall while 
the fan is running.