Yamaha BRX-610 - Инструкция по эксплуатации - Страница 2

i 

En

1

To assure the finest performance, please read this manual 

carefully. Keep it in a safe place for future reference.

2

Install this sound system in a well ventilated, cool, dry, 
clean place - away from direct sunlight, heat sources, 
vibration, dust, moisture, and/or cold. For proper 
ventilation, allow the following minimum clearances.
Top: 10 cm
Rear: 10 cm
Sides: 10 cm

3

Locate this unit away from other electrical appliances, 
motors, or transformers to avoid humming sounds.

4

Do not expose this unit to sudden temperature changes 
from cold to hot, and do not locate this unit in an 
environment with high humidity (i.e. a room with a 
humidifier) to prevent condensation inside this unit, 
which may cause an electrical shock, fire, damage to this 
unit, and/or personal injury.

5

Avoid installing this unit where foreign object may fall 
onto this unit and/or this unit may be exposed to liquid 
dripping or splashing. On the top of this unit, do not 
place:

– Other components, as they may cause damage and/or 

discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may cause fire, 

damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall and 

liquid may cause electrical shock to the user and/or 
damage to this unit.

6

Do not cover this unit with a newspaper, tablecloth, 
curtain, etc. in order not to obstruct heat radiation. If the 
temperature inside this unit rises, it may cause fire, 
damage to this unit, and/or personal injury.

7

Do not plug in this unit to a wall outlet until all 
connections are complete.

8

Do not operate this unit upside-down. It may overheat, 
possibly causing damage.

9

Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall outlet, 

grasp the plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this might 

damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used. Using 

this unit with a higher voltage than specified is dangerous 
and may cause fire, damage to this unit, and/or personal 
injury. Yamaha will not be held responsible for any 
damage resulting from use of this unit with a voltage 
other than specified.

13 To prevent damage by lightning, keep the power cable 

and outdoor antennas disconnected from a wall outlet or 
this unit during a lightning storm. 

14 Do not attempt to modify or fix this unit. Contact 

qualified Yamaha service personnel when any service is 
needed. The cabinet should never be opened for any 
reasons.

15 When not planning to use this unit for long periods of 

time (i.e. vacation), disconnect the AC power plug from 
the wall outlet.

16 Be sure to read the “TROUBLESHOOTING” section on 

common operating errors before concluding that this unit 
is faulty.

17 Before moving this unit, press   to set this unit to the 

standby mode, and disconnect the AC power plug from 
the wall outlet.

18 Condensation will form when the surrounding 

temperature changes suddenly. Disconnect the power 
cable from the outlet, then leave this unit alone.

19 When using this unit for a long time, this unit may 

become warm. Turn the power off, then leave this unit 
alone for cooling.

20 Install this unit near the AC outlet and where the AC 

power plug can be reached easily.

21 The batteries shall not be exposed to excessive heat such 

as sunshine, fire or the like.

LASER SAFETY

This unit employs a laser. Due to possible eye injury, only a qualified 
service person should remove the cover or attempt to service this 
device.

DANGER

This unit emits visible laser radiation when open. Avoid direct eye 
exposure to beam. When this unit is plugged into the wall outlet, do 
not place your eyes close to the opening of the disc tray and other 
openings to look into inside.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

This unit is not disconnected from the AC power source as long as 
it is connected to the wall outlet, even if this unit itself is turned off 
by  . This state is called the standby mode. In this state, this unit is 
designed to consume a very small quantity of power.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO 
NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

WARNING 

DO NOT TOUCH THIS UNIT WHEN IT IS USED 
CONTINUOUSLY AT HIGH VOLUME BECAUSE THE 
BOTTOM OF THIS UNIT MAY BECOME HOT. IT MAY LEAD 
TO INJURIES SUCH AS BURNS, ETC.